Chainsaw Seals and Gaskets

Chainsaw Intake Gasket This is a genuine OEM authorized replacement part used on Echo handheld lawn and garden equipment. It is made out of compound material and it is sold individually. This gasket acts as a seal between the heat dam and the cylinder head. Over time gaskets will compress and breakdown and then need replacement.

Chainsaw Fuel Bowl O-ring This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

Chainsaw Seal: Oil (helix Lip) Made of durable black rubber, this Oil Seal is an authentic OEM part for use in over 150 models of small engines. This part is sold individually, not as part of a kit or assembly. It will be found on the crankcase opening, where the crankshaft is. The Seal should be replaced when it becomes worn or damaged. When it malfunctions, you'll see oil visibly leaking. To complete this repair, you will need a screwdriver, pliers, a socket set, a wrench set, a nut driver, and an impact wrench. Customers rated the difficulty of this repair as Expert.

Chainsaw Cylinder Head Gasket Kit This item is an authentic Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the cylinder and the cylinder head. This item also includes the exhaust gasket, but is priced as a single part.

Chainsaw Kit: Cylinder Head Gasket This authentic manufacturer-sourced gasket kit is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. The parts in this kit are utilized to ensure a tight fit between the cylinder and the cylinder head. Over time gaskets may wear out and begin to crack eventually requiring replacements. For the exact locations and the correct installation of the new components, please refer to the appropriate diagrams of your model. This high-quality kit includes the head gasket, the intake port o-rings, the muffler gaskets, the intake manifold gaskets, the head bolt washers, the head bolt nuts and the installation instructions. You will need a wrench set to take the engine apart when performing this repair.

Chainsaw Valve Stem Seal This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper application please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

Chainsaw O-ring This O-ring is a genuine OEM replacement part designed for use in a variety of power tools. It is a rubber seal used to prevent pressure loss, as well as oil, fuel, and air leakage from the fuel hose. It can be found on either end of the hose. You will need to replace this ring if it has lost elasticity, or if it is cracked or deformed. The O-ring can fail due to age, exposure to heat and chemicals, pressure buildup, or poor installation. A faulty ring will result in leakages, pressure loss, and decreased equipment performance. Carefully pry the old O-ring off the hose. Remove any dirt or debris in the area and lubricate the new ring before placing it in position. Apply light pressure to the ring until it is secure and sitting snugly. Note that your equipment may have several O-rings, therefore, inspect all of them as each ring is sold individually.

Chainsaw Top Cap Gasket

Chainsaw Walbro Gasket/diaphragm Kit

★★★★★

★★★★★

1 Review

This is an authentic OEM replacement kit for use with lawn and garden equipment. Each kit includes the carburetor, cylinder, crankcase, and muffler gaskets. The carburetor gasket seals the area between the carburetor and engine block to prevent the entry of contaminants into the carburetor. The crankcase gasket prevents oil from leaking out of the crankcase. The cylinder and muffler gaskets prevent the combustion and exhaust gases from escaping. If you are experiencing common problems such as leaking, loss of compression, and poor engine performance this indicates that your gaskets may be worn down or damaged and need replacement. Carefully remove the old gaskets and thoroughly clean the mating surfaces where the new gaskets will be installed to ensure a good seal. Install the new gaskets and ensure that they fit properly.

Chainsaw Carburetor Gasket This carburetor gasket is an authentic OEM sourced item that is specially designed to provide an air tight seal between the carburetor and the insulator plate. It is commonly utilized on small engines installed on lawn and garden equipment. Over time gaskets tend to get compressed and crack eventually requiring replacement. To replace this carburetor gasket you will need a set of screwdrivers.