Briggs and Stratton Lawn Mower Hardware
Popular Briggs and Stratton Lawn Mower Hardware
Briggs and Stratton Lawn Mower Nut-Hex 5/16-18
PartSelect Number PS9999668
Manufacturer Part Number 703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.
Briggs and Stratton Lawn Mower Cotter Pin
PartSelect Number PS9999599
Manufacturer Part Number 703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs.
This is an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.
Briggs and Stratton Lawn Mower Nut
PartSelect Number PS8872769
Manufacturer Part Number 15X100MA
The Blade Nut is a 9/16-18" silver, metal nut. This part is sold individually, and requires a wrench and socket to install. Its installation is rated "Easy". This part secures the blade in place and attaches onto the blade shaft. If broken (likely due to fatigue) it may come loose and rattle, causing vibrations. Refer to your make, model and diagrams to ensure this is the correct part.
Briggs and Stratton Lawn Mower Bolt, 5/16-18 X 2
PartSelect Number PS9999462
Manufacturer Part Number 703059
This bolt is a genuine OEM replacement part used in a variety of lawn and garden equipment. It is 2 inches long with a head diameter of 5/16 inches, and a thread pitch of 16 threads per inch. The bolt is used to secure the upper and lower handles on your equipment. If the bolt is stripped or damaged, your handles will become loose and fall out of alignment. You may also notice increased shaking when using your equipment. Replace the bolt promptly as the handles can eventually collapse. Each bolt sold individually.
Briggs and Stratton Lawn Mower Nut.25-20 Hex Nylock
PartSelect Number PS9999570
Manufacturer Part Number 703232
This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to change the Nylock Nut.
Use a wrench to make this repair, ensuring your torque to the manufacturer specs.
Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.
Briggs and Stratton Lawn Mower Key-Woodruff
PartSelect Number PS9294798
Manufacturer Part Number 692193