Models > ZCGS150LSS-00

ZCGS150LSS-00 General Electric Trash Compactor - Overview

Sections of the ZCGS150LSS-00

[Viewing 7 of 7]

Manuals & Care Guides for ZCGS150LSS-00

Click to download
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - Package of 12 – Part Number: WC60X5017
Compactor Bags - Package of 12
★★★★★
★★★★★
(2)
PartSelect #: PS258002
Manufacturer #: WC60X5017
Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
$90.12
  In Stock
Order within the next 7 hrs and your part ships today!
Frame Roller Assembly – Part Number: WC17X20084
Frame Roller Assembly
★★★★★
★★★★★
(4)
PartSelect #: PS12716561
Manufacturer #: WC17X20084
$38.98
  In Stock
Order within the next 7 hrs and your part ships today!
PEDAL FOOT ASM BB – Part Number: WC17X20131
PEDAL FOOT ASM BB
★★★★★
★★★★★
(4)
PartSelect #: PS12722857
Manufacturer #: WC17X20131
The foot pedal on your trash compactor is located at the bottom of the unit. This part, when compressed, allows the container drawer on the trash compactor to slide in and out. If your current foot pe...
  No Longer Available
Trash Compactor Drawer Roller – Part Number: WC02X20110
Trash Compactor Drawer Roller
PartSelect #: PS12722845
Manufacturer #: WC02X20110
The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.
  No Longer Available
POWER NUT ASM – Part Number: WC02X20287
POWER NUT ASM
★★★★★
★★★★★
(7)
PartSelect #: PS16554596
Manufacturer #: WC02X20287
This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige...
$12.64
  In Stock
Order within the next 7 hrs and your part ships today!
Drive Gear - White – Part Number: WC22X10005
Drive Gear - White
★★★★★
★★★★★
(3)
PartSelect #: PS2364787
Manufacturer #: WC22X10005
If your trash compactor is jammed or stuck with the ram in the down position, you may have a faulty or damaged drive gear. The drive gear is located at the bottom of your compactor, and helps the driv...
  No Longer Available
RETURN SWITCH – Part Number: WC21X20249
RETURN SWITCH
★★★★★
★★★★★
(3)
PartSelect #: PS16542383
Manufacturer #: WC21X20249
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is...
$10.75
  In Stock
Order within the next 7 hrs and your part ships today!
Drive Motor and Gear Kit – Part Number: WC26X10006
Drive Motor and Gear Kit
★★★★★
★★★★★
(1)
PartSelect #: PS2359919
Manufacturer #: WC26X10006
This motor operates the trash compactor press that helps compacts the trash.
  No Longer Available
GEAR MOTOR – Part Number: WC02X20117
GEAR MOTOR
★★★★★
★★★★★
(1)
PartSelect #: PS12726309
Manufacturer #: WC02X20117
  No Longer Available
START SWITCH – Part Number: WC21X20150
START SWITCH
PartSelect #: PS12722863
Manufacturer #: WC21X20150
  No Longer Available
STOPPER – Part Number: WC11X20151
STOPPER
PartSelect #: PS12710057
Manufacturer #: WC11X20151
  No Longer Available
Compactor Bag Caddy – Part Number: WC60X10004
Compactor Bag Caddy
PartSelect #: PS1022141
Manufacturer #: WC60X10004
  No Longer Available

Questions And Answers for ZCGS150LSS-00

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rachel
February 20, 2024
Our trash compactor is compacting. When I pull up on the foot pedal it makes a humming noise.
For model number ZCGS150LSS-00
PartSelect logo
Hello Rachel, thank you for your inquiry. According to our understanding, the issue is most probably with the compactor motor, part number PS2353851. We would recommend replacing it to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the ZCGS150LSS-00

[Viewing 5 of 5]
Drawer is hard to open and or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Doesn’t stop at end of compacting cycle
Fixed by
these parts
Fixing
Show All
Compactor ram gets stuck
Fixed by
these parts
Fixing Fixing
Show All
Won’t start
Fixed by
these parts
Fixing
Show All
Won’t stay on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Trash compactor motor buzzing, often did not cycle
First I removed the trash compactor from the cabinet and transported it to the garage to avoid scraping the kitchen floor....I then removed the the sheetmetal cover enclosing the motor by removing several sheetmetal screws. To remove the motor, I then removed the compactor drawer and tilted the compactor onto its front (the side you pull the drawer in and out of). This allow you to get to the bottom of the compactor. I then removed 3 sheet metal screws attaching the bottom cover of the compactor. After removing the bottom cover, I could then access the 4 mounting nuts that hold the motor in place. I disconnected the wiring harness to the motor, removed the motor and replaced it. The motor plate allows you to adjust the chain tensioning and gear lash of the drive motor. I adjusted and tightened the plate to provide close gear lash, and chain tension of about 1/2" play. Re-installed the motor cover and bottom plates, plugged the compactor into a wall socket, re-installed the compactor drawer and tested for several cycles. All is well. FYI - I do not think the motor itself was bad; however, there is a centrifugal switch built into the motor assembly...that is what I believe failed. The motor and centrifugal switch come as a one assembly.
Parts Used:
Drive Motor and Gear Kit
  • Jeffrey from San Mateo, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
42 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trash compactor would not shut off at end of cycle. Would have to manually turn it off.
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor worked fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
Parts Used:
RETURN SWITCH
  • Brian from HOUSTON, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
New part problem, wire harness wrong
The wire harness from the part supplier was set up wrong, two of the three wires were switched and it damm near burned up the new motor. I had to correct the error by switching the wires around so that they matched the wireing from the original motor.
Parts Used:
Drive Motor and Gear Kit
  • mark from colorado springs, CO
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!