Models
>
ZBD6800N00BB
ZBD6800N00BB General Electric Dishwasher - Overview
Sections of the ZBD6800N00BB
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
Dishrack Rollers and Axles - Kit of 8
PartSelect #: PS11725221
Manufacturer #: WD35X21041
If you are having trouble rolling your dish rack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Replace the parts ...
$32.18
In Stock
Silverware Basket
PartSelect #: PS959351
Manufacturer #: WD28X10128
This is a basket for washing flatware or silverware in your dishwasher.
$32.35
In Stock
Upper Rack End Cap
PartSelect #: PS958986
Manufacturer #: WD12X10184
This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from fall...
$8.06
In Stock
Detergent Dispenser with Rinse Cap
PartSelect #: PS958966
Manufacturer #: WD12X10163
This detergent dispenser assembly is attached to the inner door panel of a dishwasher. This part holds detergent and dishwasher rinse products in a covered container. If your dispenser will not open, ...
$84.00
In Stock
Upper Rack Wheel
PartSelect #: PS11721507
Manufacturer #: WD35X21036
Comes with the axles.
$55.42
In Stock
Lower Spray Arm - Gray
PartSelect #: PS1020205
Manufacturer #: WD22X10047
The lower spray arm is mounted to the bottom of your dishwasher tub, and it rotates and sprays water to clean the dishes in the lower dish rack. This spray arm is made of gray plastic, and is approxim...
$133.70
In Stock
Tub Gasket
PartSelect #: PS958888
Manufacturer #: WD08X10032
This gasket lines the inside cabinet in the dishwasher.
$40.45
In Stock
Tine Retainer
PartSelect #: PS958926
Manufacturer #: WD12X10116
This dishwasher retainer connects to the removable tine.
$8.06
In Stock
Rinse Aid Cap
PartSelect #: PS958932
Manufacturer #: WD12X10122
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
$16.44
In Stock
Hinge Arm Link
PartSelect #: PS259336
Manufacturer #: WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$8.54
In Stock
Screw 8-16 hxw 1/2 Stainless Steel
PartSelect #: PS258461
Manufacturer #: WD02X10067
Sold Individually.
$8.54
In Stock
Cage Roller Bearing Assembly
PartSelect #: PS959485
Manufacturer #: WD30X10020
Aides with movement or sliding of the dishrack.
$35.93
In Stock
Questions And Answers for ZBD6800N00BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the ZBD6800N00BB
[Viewing 11 of 11]Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lower wheel axles worn out
Simple repair... Great Company, quick shipping (in CA had it the next day). Quality parts, GE OEM!! And to top it off the lowest prices!!
Parts Used:
-
Glen from Alpine, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
966 of 986 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My wheels would not stay on the roller rack which made me dread having to put a dish in the rack.
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Parts Used:
-
Michelle from Weddington, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
752 of 762 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack began rusting and wheels broke off.
Pull old rack out, slip new one in!
One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.
One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.
Parts Used:
-
nathan from commerce, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
540 of 741 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!