Models > TGC3X6XCB1

TGC3X6XCB1 Tappan Cooktop - Overview

Sections of the TGC3X6XCB1

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Surface Burner Igniter Electrode – Part Number: 316011200
Surface Burner Igniter Electrode
★★★★★
★★★★★
(4)
PartSelect #: PS436633
Manufacturer #: 316011200
Use this igniter with sealed burners.
$32.04
  In Stock
Spark Module – Part Number: 316135702
Spark Module
★★★★★
★★★★★
(2)
PartSelect #: PS2350722
Manufacturer #: 316135702
This spark module or range spark module, is used in ranges and ovens. The spark module monitors and controls the spark to ignite the surface burner in a range. It does this by sending a certain amount...
$94.31
  In Stock
Small Burner Base with Orifice and Igniter – Part Number: 5303935025
Small Burner Base with Orifice and Igniter
PartSelect #: PS470099
Manufacturer #: 5303935025
This part also includes 3 screws. Small burner cap is sold separately.
  No Longer Available
Burner Pan Gasket – Part Number: 318053901
Burner Pan Gasket
PartSelect #: PS442167
Manufacturer #: 318053901
$24.26
  In Stock
Orfice – Part Number: 5303210090
Orfice
PartSelect #: PS456292
Manufacturer #: 5303210090
$43.48
  Special Order
Igniter Switch – Part Number: 316032002
Igniter Switch
PartSelect #: PS437310
Manufacturer #: 316032002
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
$55.82
  Special Order
Bushing – Part Number: 318146301
Bushing
PartSelect #: PS1150354
Manufacturer #: 318146301
  No Longer Available
Screw – Part Number: 316011100
Screw
PartSelect #: PS436632
Manufacturer #: 316011100
  No Longer Available
Gas Pressure Regulator – Part Number: 5308007974
Gas Pressure Regulator
PartSelect #: PS473609
Manufacturer #: 5308007974
***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
$250.69
  In Stock
TRIM RING – Part Number: 318050505
TRIM RING
PartSelect #: PS442065
Manufacturer #: 318050505
$64.84
  Special Order
PAN-BURNER, SMALL BLACK – Part Number: 318066901
PAN-BURNER, SMALL BLACK
PartSelect #: PS442327
Manufacturer #: 318066901
  No Longer Available
SCREW – Part Number: 5303307980
SCREW
PartSelect #: PS465264
Manufacturer #: 5303307980
$11.77
  In Stock

Questions And Answers for TGC3X6XCB1

Be the first to ask our experts a question about this model!

Common Symptoms of the TGC3X6XCB1

[Viewing 3 of 3]
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Igniter porcelain was cracked and burner would not light.
un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke.
Parts Used:
Surface Burner Igniter Electrode
  • Rusty from Howell, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
53 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad igniter.
The stove was older so the burner was hard to get out. The small screw heads broke off, so I had to carefully center punch and drill out the screw bodies. The igniter screw was also frozen in the pot metal burner. That screw requied drilling and tapping with the installation of a new 6-32 screw. Once the burner was refurbished, the igniter mounted easily. Afte attaching the gas line and igniter wire, the burner worked great.
Parts Used:
Surface Burner Igniter Electrode
  • chris from Venice, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not lite
no need to remover burner. Lift top up use a 1x4x5" to hold top up. Use short #2 screw driver remove screw and replace with new igniter
Parts Used:
Surface Burner Igniter Electrode
  • Terry from Wilkinson, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!