Models > SNK26CB

SNK26CB Amana Range - Overview

Models starting with SNK26CB

Keep searches simple, eg. "belt" or "pump".
2 Piece Broiler Pan – Part Number: 4396923
2 Piece Broiler Pan
★★★★★
★★★★★
(4)
PartSelect #: PS971245
Manufacturer #: 4396923
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
$37.51
  In Stock
Frame Screw – Part Number: WP7101P126-60
Frame Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11743908
Manufacturer #: WP7101P126-60
Sold Individually.
$7.76
  In Stock
Stand Mixer Screw – Part Number: WP4159193
Stand Mixer Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742292
Manufacturer #: WP4159193
This screw is sold individually.
$8.63
  In Stock
Suface Burner Ignition Switch – Part Number: WP4157180
Suface Burner Ignition Switch
★★★★★
★★★★★
(1)
PartSelect #: PS11742283
Manufacturer #: WP4157180
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
$65.30
  In Stock
Oven Seal - Top or Bottom – Part Number: Y07623602
Oven Seal - Top or Bottom
PartSelect #: PS1757448
Manufacturer #: Y07623602
This piece of oven door seal has a metal hook on each end. This seal is compatible with the top and the bottom of the oven door window.
  No Longer Available
Drawer Glide – Part Number: W10709871
Drawer Glide
PartSelect #: PS10065974
Manufacturer #: W10709871
Sold individually. This part helps your drawer glide in and out smoothly.
$10.70
  Special Order
SCREW – Part Number: W10856125
SCREW
PartSelect #: PS11731323
Manufacturer #: W10856125
Sold individually.
  No Longer Available
Top Burner Spark Igniter – Part Number: Y07491203
Top Burner Spark Igniter
PartSelect #: PS1757313
Manufacturer #: Y07491203
Also known as a spark electrode.
  No Longer Available
Nut – Part Number: M0282009
Nut
PartSelect #: PS1722352
Manufacturer #: M0282009
This part is sold individually. This nut can be found in various appliances including a dishwasher, air conditioner, washer, dryer, range/cooktop, oven, freezer, range hood, and refrigerator. There is...
$14.09
  Special Order
Valve Screw – Part Number: W10491986
Valve Screw
PartSelect #: PS3651486
Manufacturer #: W10491986
Part might differ in appearance, but functions same as original. Sold individually.
  No Longer Available
Bake or Broil Spark Igniter – Part Number: Y07491300
Bake or Broil Spark Igniter
PartSelect #: PS1757316
Manufacturer #: Y07491300
Also known as spark electrode. This part helps your burner ignite and produce flame.
  No Longer Available
Door Hinge – Part Number: Y07655200
Door Hinge
PartSelect #: PS1757506
Manufacturer #: Y07655200
  No Longer Available

Common Symptoms of models starting with SNK26CB

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Purchased home but stove had no broiler pan.
Purchased 2 piece broiler pan from this site
Parts Used:
2 Piece Broiler Pan
  • Raymond from BLOOMINGTON, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
14 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
electric ignite gas stove kept clicking the ignitor unless unplugged from electrical outlet
I removed the 2 screws that held the housing on at the back of the stove. Then I removed the 2 screws that held the module to the back of the stove. Since I am not an experienced electrical person (I am a female nurse in the operating room), I unplugged 1 wire at a time from the old module and plugged it into the new module. I repeated this step with each wire to make sure I didn't put the wrong wire on a wrong spot until I had all the wires to the new module. Then reattached the screws, plugged in the oven and presto, it works just fine! Was amazed at how easy it was. A 50 dollar part instead of a new 1500 dollar stove. How easy is that?
Parts Used:
Spark Module
  • Diana from Jacksonville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor did not spark when turning the know
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light switch. After detaching the power supply to the defective ignition unit, it just pulls right off. Push the new switch on over the knob shaft and reassemble.
Parts Used:
Suface Burner Ignition Switch
  • Richard from Lansing, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!