This V-style drive belt measures 51 inches long and 3/8 inches wide. The belt is made to slip on the motor pulley to bring the basket up to the speed required. Continued use can result in the belt suf...
$10.98
In Stock
Order within the next 10 hrs and your part ships today!
The lid hinge on your washer is connected to the lid and allows it to open and close. If you find you cannot open or close the lid to your washing machine properly, you may need to replace the lid hin...
$11.18
In Stock
Order within the next 10 hrs and your part ships today!
This lid hinge pin allows a washing machine lid to pivot open and closed properly. The hinge pin may need to be replaced if the lid will not open or will not close. The part is white and made of plast...
$22.28
In Stock
Order within the next 10 hrs and your part ships today!
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
$13.11
In Stock
Order within the next 10 hrs and your part ships today!
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If your machine is not draining properly or if it is noisy and s...
$120.13
In Stock
Order within the next 10 hrs and your part ships today!
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
$69.83
In Stock
Order within the next 10 hrs and your part ships today!
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$7.76
In Stock
Order within the next 10 hrs and your part ships today!
This package contains a new set of six springs. The suspension springs in your washer connect to the bottom of tub, and help to hold it in place. If your washer tub shakes, or moves around a lot durin...
$68.55
In Stock
Order within the next 10 hrs and your part ships today!
This water valve is for 60% hot water and 40% cold - This is done to save on energy.
$123.10
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for PAVT234AWW
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 1, 2020
What would cause machine to stop mid cycle
For model number PAVT234AWW
Hello and thank you for writing.
If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly PS2002890 can fail either mechanically or electrically. You also should check the water inlet valve PS11738838 for damage. We hope this helps. Please contact us anytime if you require further assistance.
Hello Travis, thank you for your question. The motor pulley for this unit is not sold separately. The whole motor would have to be replaced. I hope this helps.
Was this helpful?
Thank you for voting!
Anthony
September 1, 2021
I need the belt pulley. There are 3 on the bottom of the washer where the belt is. I just need 1 pulley. I need a part number
For model number PAVT234AWW
Hello Anthony, Thank you for the question. The three Pulleys located on this model are the Motor Pulley and the Pump Pulley. They are sold as part of the Motor and the Pump and not on their own. The other pulley would be the transmission Pulley. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
When I turn the knob one to fill washer with water it agitates instead of filling with water
For model number PAVT234AWW
Hello Jane, thank you for your inquiry. Yes, we advise that the Timer PS11738818 is likely faulty. We have a video for you to access If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
The spin cycle is not going fast enough. It spins but at a much slower rate. The clothes are coming out too wet. What might be the problem?
For model number PAVT234AWW
Hello Michael, thank you for contacting us. The issue is most probably related to the transmission pulley kit, part number PS2003651, and the drive belt, part number PS11738882. We would also recommend checking the drain hoses and making sure that there is no blockage. If this does not help, the motor, part PS11738839, is most likely to be defective. Please reach out to customer service if you need help placing an order. Glad to be of help!
I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.
The pump is located behind a small panel on the back, lower left side of my washer. It's attached to the bottom frame with 3 screws. It has two hoses attached, each with one spring clamp. Lift one side of the washer and slip the drive belt off the pully. Release the spring clamps on the hoses with a pair of pliers and remove the hoses. A
... Read moresmall amount of water will drain from the hoses and pump when removed. Remove the three screws holding the pump to the frame and remove the pump. Install the new pump in the same position. Reattach the hoses, replace the belt, and reinstall the cover panel. That's all there is to it.
unplug the washer. Removed the top of the washer by removing the hold scews and tabs on the upper back. Place a scew drive under the front and pry up to release the snap tabs. Then the front panel by removing the two screws on top and lift the panel up to expose the motor at bottom front. Remove the motor cover (plastic)and motor from the
... Read more base, replace the pulley on the shaft (you may need to break or pry the old pulley off) install the new pulley making sure it is all the way up the shaft locking the tabs into the shat groove. Reinstallmotor to the base. To replace the belt, tilted the unit backwards to access the pulleys from the bottom and installed. Note: it ios easier to install the belt fully on the two smaller puleys attcahed to the drive motor and pump and then wrap as much as you can around the larger drum pulley. Hold the belt in one hand and turn the drum pulley clockwise with the other and the belt will follow and install. reverse steps to reassemble.