Models
>
LCU340CP
LCU340CP LG Air Conditioner - Overview
Models starting with LCU340CP
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
LG Mini Split Air Conditioner Error Code CH 46
Remove the main power disconnect. Remove the top cover and the fan-side side panel. Disconnect the thermister from the main circuit board located under top panel. Remove the two thermister sensors from the holders attached to suction piping. Install the new thermisters and reconnect the harness to the circuit board. Reinstall top cover an
... Read more
d side panel. Reinstall main power disconnect. Verify that error code has cleared. Operate the system normally.
Read less
Parts Used:
-
Malcolm from Mt Pleasant, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
23 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error CH 46 Suction Pipe Thermistor
Download PDF Multi Air Conditioner SVC Manual for LMU187HV,,, Disconnect the Power,,, Remove cover of the Outdoor Compressor, Remove black cover to the electronics board.. Find the Red Plug-in to the existing Suction Pipe Thermistor, replace with the new one, match each sensor (2) follow the leads one by one, remove the old attach the new
... Read more
ones... Replace covers then the Disconnect & Waa-Laa,,, Fixed
Read less
Parts Used:
-
Paula from Yantis, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ERROR 46 Thermistor error
I removed the front panel. Then opened case with circuit board and thermistor connections. Cut zip ties securing wires and thermistor. Removed old thermistor and replaced with new part. Placed new zip ties to secure wires. Reassembled.
Parts Used:
-
Justin from CHEHALIS, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!