Models
>
JP256BL1BB
JP256BL1BB General Electric Cooktop - Overview
Sections of the JP256BL1BB
[Viewing 1 of 1]Manuals & Care Guides for JP256BL1BB
Click to downloadKeep searches simple, eg. "belt" or "pump".
Dual Burner Control Switch
PartSelect #: PS236785
Manufacturer #: WB24T10063
This switch controls the dual burner.
$87.11
On Order
KNOB KIT
PartSelect #: PS11773514
Manufacturer #: WB03X26320
The infinite knob is commonly referred to as a range surface burner knob and controls the heat of the surface burner on your range. This control knob is black in color, and measures approximately 2 in...
$110.62
In Stock
DUAL HEATING ELEMENT REPLACEMENT KIT
PartSelect #: PS16729055
Manufacturer #: WB30X43559
$413.98
In Stock
Questions And Answers for JP256BL1BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JP256BL1BB
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No control of right front burner (dual burner)
The burner would work but you could not regulate the heat. I ordered and replaced the control switch for that burner. The part was like for like and reasonably priced compared to other websites and dealer. The picture showed that it was identical. I ordered one day and it was here the next. I had drawn a diagram of where the wires went on
... Read more
the old switch so it was very easy to replace. Probably took me 15 minutes or so. Works perfectly and by buying from this website it saved me a few bucks.
Read less
Parts Used:
-
Jeff from Clinton, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
18 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual burners stay on hi all the time. No regulation.
The hardest part was getting the correct part. I trusted the on line number and the first part I received was incorrect. I should have taken the part number off the old switch. When I did, I found out that the part number changed when I tried to order it. When the part came, the wiring instructions were not even close. I just took one wir
... Read more
e at a time off the old switch and put it on the same terminal of the new switch. The repair was/is very simple made complex and too much time because of a wrong part and incorrect wiring instructions. As far as getting the incorrect and correct parts through the mail it was very fast. Received both parts in less than 3 days. A bonus is that I sent the old switch back for a rebate. Thanks for that.
Read less
Parts Used:
-
Peter from whitesboro, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
10 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner light was on - burner control spun freely
Looked up the part, ordered it, and it was there in 3 days. It was slightly different than the old control, but a very well-written set of instuctions detailed which wires to move to which terminal. The entire repair took about 30 minutes, including moving the range out, replacing the control, and push the range back in place. Works pe
... Read more
rfectly.
Read less
Parts Used:
-
Richard from Indianapolis, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
11 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!