This stainless burner knob is used in ranges and ovens. The knob allows you to adjust the heat of the surface burner on your range. This knob accepts a D-shaped shaft. If your touchpad does not respon...
$31.48
In Stock
Order within the next 7 hrs and your part ships today!
This is a burner electrode for your oven, range, or stove. This part has a male spade. It helps your burner ignite by creating a spark, producing a flame, and lighting the surface burner. If your burn...
$41.57
In Stock
Order within the next 7 hrs and your part ships today!
This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This...
$81.10
In Stock
Order within the next 7 hrs and your part ships today!
This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, ...
$9.13
In Stock
Order within the next 7 hrs and your part ships today!
Order within the next 7 hrs and your part ships today!
Questions And Answers for JGC8536ADS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
December 14, 2019
When I turn on the burner the igniter lights the burner but keeps on sparking the whole time the burner is lit
For model number JGC8536ADS
Hi James, I would make sure the burner cap is in alignment, you can also try and clean debris out of the grooves of the igniter. Otherwise you may need to replace the igniter itself. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael West
February 19, 2020
I am trying to remove the large head on the burner to replace the igniter there are (2) two small torx screws i removed and i can’t get the head off the cooktop. I’m not sure how the head is connected to the the surface (is it sealed or am i missing something?)
For model number JGC8536ADS
Hello Michael, thank you for your question. The head should simply lift up off the top when the screws are removed. It sits on the orifice and tube holder. If the head will not come up, try some solution around the head to loosen it. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 23, 2022
The 2 screws on each of the burner heads I'm guessing is how you get the top of this cooktop off. Mine will not move and I think I will break the screw if I try much harder. I have tried penetrant to no avail. Is this cooktop still available and what is the price.
For model number JGC8536ADS
Hello Bill, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738715. All prices are shown on the site. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!