Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
The drive gear is located at the bottom of your compactor and helps the drive motor power the ram by operating the chain that powers the compacting ram. If you notice that your drive gear is broken or...
This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag.
* This part also comes with the 2 handles.
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the
... Read morenew gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.
After calling a repair man and being told my appliance was to old for him to repair I discovered your website. I simply entered the model number and a picture of the part I was looking for was easily found. I ordered online and received the replacement parts 5 day's later. I simply swapped out the old locking nuts with the new ones from
... Read more your website and the repair was complete. What could have been an easy $100 repair cost a fraction of that and the trash compactor is working just fine.
