Models
>
FWS1233FS1
FWS1233FS1 Frigidaire Washer - Overview
Sections of the FWS1233FS1
[Viewing 7 of 7]Manuals & Care Guides for FWS1233FS1
Click to downloadInstall
Installation Instructions
(0.44MB)
Care
Use and Care Manual
(0.25MB)
Wiring
Wiring Diagram
(0.21MB)
Keep searches simple, eg. "belt" or "pump".
Selector Knob
PartSelect #: PS2330885
Manufacturer #: 134844410
This selector knob, also be known as the laundry appliance control knob, is meant for your washer or dryer. This model is sold individually and takes a D-shaped shaft. The purpose of this part is to a...
$57.83
In Stock
Drive V-Belt
PartSelect #: PS1146950
Manufacturer #: 134511600
This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer, your washer does no...
$24.93
In Stock
Drain Pump - 120V 60 Hz.
PartSelect #: PS7783938
Manufacturer #: 137221600
This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, which includes a red fl...
$165.56
In Stock
Screw-In Plastic Leveling Leg
PartSelect #: PS1152204
Manufacturer #: 134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your a...
$25.94
In Stock
Tub Seal Assembly
PartSelect #: PS459481
Manufacturer #: 5303279394
If you have a leaky washer, then your tub seal may be the culprit. The tub seal assembly may also be known as the washer tub seal, and is a part for your washer. The function of this piece is to make ...
$74.78
In Stock
Tension Idler Pulley
PartSelect #: PS418897
Manufacturer #: 131862900
The idler pulley on your washing machine allows the drive belt to operate smoothly. If your washer is not spinning or agitating, makes too much noise, or you notice a burning smell when it is operatin...
No Longer Available
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$11.21
In Stock
Washer Lid Lock with External Safety Switch
PartSelect #: PS648775
Manufacturer #: 134101800
Mounting bracket on this part replaces old style ( You may need to drill off old bracket before mounting new lock).
No Longer Available
Drain Hose
PartSelect #: PS1524515
Manufacturer #: 134592700
This drain hose, used in washing machines, delivers water from the drain pump to the house drain. The hose is 7 1/2 feet (90 inches) long. If your hose is leaking, it is best to replace it with a new ...
$70.75
In Stock
Agitator Drive Block
PartSelect #: PS1152574
Manufacturer #: 134418700
The agitator drive block rotates the agitator assembly in your washer. If the drive block breaks down due to wear and tear the agitator will stop working. If you notice that your washer is making loud...
$63.38
In Stock
Questions And Answers for FWS1233FS1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
CRAIG
May 16, 2023
washer door locks and drum spins at every control setting, no water in tub. is the control bad or is there a water level switch that is stuck making the control think it needs to drain?
For model number FWS1233FS1
Hi Craig, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the water level pressure switch, part number PS975847, to fix this issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Robert
July 13, 2021
How to use tester to check drain pump and motor
For model number FWS1233FS1
Hello Robert, Thank you for the question. You will need to test to see if it has Continuity. We have attached a How To Video for testing with a Multi Meter. We hope this helps! https://www.youtube.com/watch?v=bWC44fHn0As
Was this helpful?
Thank you for voting!
Donna
July 27, 2023
Machine not responsive at any setting
Checked water input
Checked circuit breaker
Checked plug in
Can hear clicking when lowering lid, lid is shutting
Not running at all
For model number FWS1233FS1
Hi Donna, thank you for the question. First, you may need to make sure that there is power coming to the washer. If the washer has power but it still not works, then you may need to check the timer, part number PS419282, as it is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Donald
December 20, 2023
runs cold water on hot water cycle.
For model number FWS1233FS1
Hello Donald, thank you for contacting us. Based on our understanding of the issue, we would suggest replacing the temperature control board, part number PS1560438, to solve the problem. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the FWS1233FS1
[Viewing 9 of 9]Will not drain
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace broken drive belt
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub p
... Read more
ulley by hand to run belt on,release tension on idler arm.replace front panel and lower top.WALAAH!!!! you are done.
Read less
Parts Used:
-
rodney from fairfield bay, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
276 of 308 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would't spin all water out or rinse out clothes
uplugged washer took front off washer 2 screws pryed up top pump was mounted with 2 screws and 2 wires took off found change in pump and the fins to pump worn off ordered part off line the wait for part was longer than the amount of time to fix problem and cost of part saved me about $25-35 if I was to buy local worth wait save money and
... Read more
fix problem washes like new spins and drains all water from tub.
Read less
Parts Used:
-
kenneth from willard, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
166 of 202 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After a full cycle the washer would not drain the water
After reading the possiblilities of problem, I determined that the drain pump was not working; therefore I ordered a new one. When I opened the washer to replace the part, I found out that the pump was working but the filter was stuffed with pieces of rubber that came out from a rug I washed. Once all the stuff was removed, the washer wor
... Read more
ked just fine. PartSelect was very gracious to accept the returned with not questions asked!! Thanks partSelect.
Read less
Parts Used:
-
sara from North Miami, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
81 of 90 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!