If you are having trouble cleaning out your grease filter, or if it is damaged to the point of no return, maybe it is time to replace it. The grease filter is a ventilator that traps grease from the e...
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
$45.04
In Stock
Order within the next 1 hr and 10 mins and your part ships today!
This cooking tray is a part for your microwave. You may also know this part as a turntable tray or a carousel. The function of this tray is to provide a levelled cooking surface for you to set your fo...
$90.13
In Stock
Order within the next 1 hr and 10 mins and your part ships today!
This charcoal filter is designed for use in your microwave oven. The function of this part is to remove cooking odors from the air that circulates through the microwave vent. If your current filter is...
$44.78
In Stock
Order within the next 1 hr and 10 mins and your part ships today!
This 20-watt lightbulb is most commonly found in the microwave. The lightbulb brightens the interior of the microwave while it is running so you can keep an eye on the food while it cooks. You will ne...
$11.57
In Stock
Order within the next 1 hr and 10 mins and your part ships today!
The roller guide sits underneath the glass turntable tray in your microwave. If your microwave turntable tray is not rotating properly, you may need to replace the turntable roller guide. The function...
This turntable motor is used in microwaves. This is what rotates the glass tray so that your food is heatied evenly. The specs for this synchronous motor are 120 Volts, 60Hz, 3rpm, and 2.1 Watts. It f...
$63.42
In Stock
Order within the next 1 hr and 10 mins and your part ships today!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Removed the retaining clip that keeps the door on, took the door off. Removed the plastic rim that is clipped into place. Removed old screws holding on handle and replaced.
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.