Models
>
AJHS10DCM1
AJHS10DCM1 General Electric Air Conditioner - Overview
Sections of the AJHS10DCM1
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Air Filter
PartSelect #: PS279026
Manufacturer #: WJ85X10010
This slide -in air filter is a genuine OEM replacement part for your air conditioner. The air filter helps eliminate dirt and dust from re-circulating through the air when running your air conditioner...
No Longer Available
Control Knob with Clip
PartSelect #: PS274605
Manufacturer #: WJ12X10009
This is a control knob with clip, used for air conditioners. This type of knob allows you to control the temperature by rotating it. Replace the knob if yours is damaged, broken, or will not rotate co...
$38.49
In Stock
Motor Cushion
PartSelect #: PS274091
Manufacturer #: WJ01X10034
Sold individually. This part works in conjunction with the fan motor.
$17.24
In Stock
Centrifugal Fan Wheel
PartSelect #: PS278346
Manufacturer #: WJ73X10008
Also known as Blower Wheel.
No Longer Available
Questions And Answers for AJHS10DCM1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the AJHS10DCM1
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
vibration, one fan blade broken off
Removed A/C unit from wall, removed 8 screws that held fan motor in place, removed 8 screws that held fan shroud in place, removed fan blade nut and pulled fan blade unit from motor shaft. Reversed steps to install.
Parts Used:
-
HERBERT from WOODCLIFF LAKE, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
15 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Power Cord Replacement
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on termi
... Read more
nals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.
Read less
Parts Used:
-
David from San Jose, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
10 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blade broken
-
Nelson from Jersey City, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!