Locating Your Dishwasher's Model Number

Sample Model Number Tag

Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number plate shown here:

After You Locate Your Model Number

Once you locate your dishwasher's model number, type the model number into the text box at the left. There is an example below. Then click on the "Search" button in order to conduct a search for the part you need. PartSelect will match a partial model number, so you may only need to type in the first few letters or numbers of the appliance model number.

Example:

Using PartSelect for the First Time?

Click here for helpful information on finding your appliance part and for instructions on how to use PartSelect.

FREE appliance repair advice from the pros!

Defroster heater coil Fried Mon, 12 May 2008 14:19:20 GMT Post By: DaveB2742 My Refrigerator stopped working and found that the cooling coils were covered in Ice. Behind it was the defroster heater coil that was FRIED!(melted) My question: There is what appears to be a...

Jenn-Air Oven Mon, 12 May 2008 13:52:39 GMT Post By: scootersid I have a Jenn Air oven that the clock timer led module quit working. What do I need? The oven still works just cannot see the led lights. I cannot find the right part I need. Any suggestions? thank...

Timer? Mon, 12 May 2008 13:46:20 GMT Post By: noa dryer runs constantly in all settings, heats and dryies ok but never shts off until door is opened. is this the timer? and if i buy one and it turns out not to be, can i return it

Thermal fuse popped - just replace that or is there more troubleshooting? Mon, 12 May 2008 11:04:58 GMT Post By: babaganoosh I'm helping a friend get his 14 year old KitchenAid gas dryer going again (no hot air). Traced it to the thermal fuse. Bypassed it and the heat comes on. So we'll replace that. But he showed me a...

Low voltage to gas valve Mon, 12 May 2008 06:38:52 GMT Post By: gblackman I am an HVAC professional and therefore no stranger to gas controls. My oven has a low flame (verified by clocking gas meter) and often lights hard, slow to heat, slow to cook, etc. I purchased a...

See all our repair forums