Toro Small Engine Parts

Toro Small Engine Nut-Lock, Ni This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

Toro Small Engine Ring-Retaining This metal retaining ring, otherwise known as a snap ring, holds parts in place in your lawn equipment, such as blades, shafts, pulleys, or other rotating components, to prevent them from sliding off or shifting. A broken ring may be warped, cracked, or have missing sections. You can tell if it is damaged when the components in your machine are wobbly or falling off. To remove a retaining ring, you will need a pair of needle-nose pliers or lock/snap ring pliers that fit into the grooves of the ring. By using the pliers to release the tension on the ring, you can carefully slide it off the machine. Consult your user manual for instructions on the removal process and to confirm how many rings your machine will need. This replacement part is sold individually and is produced by the original equipment manufacturer so that it precisely fits your machine.

Toro Small Engine Nut-Lock, Ni The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

Toro Small Engine Key-Ignition This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental or unauthorized use of the equipment. A broken key might be loose or hard to turn. In some cases, it might have completely fallen out of the switch. Without the ignition key, it will be difficult or impossible to start the engine. Locate your ignition key by reading your user manual. To remove a stuck ignition key, you may need to use a small amount of lubricant on it. While turning the key in the ignition switch, gently wriggle it back and forth. There may also be a release button that you could press, depending on your model type. This replacement part is an OEM product and is sold per unit.

Toro Small Engine Nut-Lock, Ni

Toro Small Engine Washer-Flat

Toro Small Engine Bearing-Cone, Tapered

Toro Small Engine BOLT

Toro Small Engine Cover-fan

Toro Small Engine Blade-18 Inch