Tappan Cooktop Elements and Burners

Videos!

Your Price

$16.24

Tappan Cooktop Terminal Block Kit

★★★★★

37 Reviews

PartSelect Number PS470125

Manufacturer Part Number 5303935058

This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Installation Instructions

Steven from Taylors, SC

rental property stove only had 2 working burners and bottom drawer off track

first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place Read more...

Videos!

Your Price

$20.39

Tappan Cooktop Surface Element - 8 Inch - 2600W

★★★★★

20 Reviews

PartSelect Number PS2339242

Manufacturer Part Number 316442301

The range surface element provides heat to the cooking surface on top of the range. The element has a universal plug, is 8 inches in diameter, spans 5 coils in width and reaches 2600 watts. Before you begin your repair, ensure that the elements are turned off and have had time to cool. Once you have removed the element this is a good time to ensure the terminal is in good condition (they can wear over time) which may need to be replaced as well. This quick repair requires no tools except gloves for safety, and a small amount of time.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

David from Encinitas, CA

burner shorted out

I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner. Read more...

Videos!

Your Price

$34.52

Tappan Cooktop Surface Element - 8 Inch - 220V

★★★★★

23 Reviews

PartSelect Number PS2339241

Manufacturer Part Number 316442300

If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part is 220 Volts and 4 Turn. The burner element connects to the terminal block inside the range. To do this repair, simply remove the old surface element and replace it with the new part. This product is sold individually. As the surface element is hot when it is on, be sure to unplug the range from the power source before completing this repair.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Kathy from Lebanon, IN

burner quit working

pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great. Read more...

Videos!

Your Price

$39.32

Tappan Cooktop 6-Inch Coil Burner Element

★★★★★

10 Reviews

PartSelect Number PS2368974

Manufacturer Part Number 318372211

This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Matthew from Columbus, IN

Burners on 53 year old range kept going out

When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home. Read more...

Videos!

Your Price

$35.48

Tappan Cooktop Surface Element - 6 Inch

★★★★★

9 Reviews

PartSelect Number PS2582086

Manufacturer Part Number 318372210

This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Chhabildas from Charlotte, NC

Enement was blew out.

I order the Element and received just in 4 days. It is Real incredible. I just opened the box and replaced the burners. Read more...

Videos!

Your Price

$161.67

Tappan Cooktop Radiant Element with Limiter - 1200W

★★★★★

13 Reviews

PartSelect Number PS1528719

Manufacturer Part Number 318178110

This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity. This model is sold individually and is 1200 watts. The tools you will need for this installation include a Phillips screwdriver and a 14-inch nut driver.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Lori from Winter Haven, FL

burned out burner

First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!! Read more...

Your Price

$32.04

Tappan Cooktop Surface Burner Igniter Electrode

★★★★★

4 Reviews

PartSelect Number PS436633

Manufacturer Part Number 316011200

Use this igniter with sealed burners.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Will Not Start
See more...

Installation Instructions

Rusty from Howell, NJ

Igniter porcelain was cracked and burner would not light.

un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke. Read more...

Your Price

$37.34

Tappan Cooktop Burner Grate

★★★★★

2 Reviews

PartSelect Number PS437719

Manufacturer Part Number 316055800

This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on while cooking on your stove. The color of the burner grate is black, and it has a diameter of 6.5 inches. This part is sold individually and includes only one round gas grate per package. The most common reason for needing to replace this part is if your current burner grate has incurred damage from daily usage.

Installation Instructions

Mariano from Torrance, CA

Very old burner grates & drip pans, need replacement.

Took out the old & easily replace it with the new set. No tools required. Read more...

Your Price

$185.49

Tappan Cooktop ELEMENT

PartSelect Number PS1528763

Manufacturer Part Number 318198834

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Neil from Jessup, PA

rf burner was not working

First I removed 2 screws that held the stove top in place. Raised the stove top and support it. Then, I removed the hold down spring for the burner and removed three wires from the old burner. I found that the connector on the white wire was spread open too much so I crimped it closed for a better fit on the terminal. I reattached the three wires, put the hold down spring back in place, lowered the stove top and installed the 2 screws. JOB DONE Read more...