Just turn old filter counterclockwise, pulli it out, insert the new filter from "Part Select" clockwise and WALLLA!!!!...we have fresh clean water.That easy a caveman can do it.

It was really easy. Took off grill at bottom of refrigerator, turned existing filter to get it out and then inserted the new one.

After cutting supply line to ice maker and using syringe to back feed ice maker discharge outlet- I learned that there was no freeze blockage in supply.
Using nut driver, the valve was removed and electrical and water lines removed and reinstalled on new valve.
Reinstallation of assembly using nut driver completed the whole repair in less than 5 minutes.
The part was a perfect match.

Thanks

First I removed the bolt that holds the cover on the top hinge bracket. Then I removed all items from the shelves inside the door by lifting the shelves out and placing them on the counter. Next I removed the 3 screws holding the hinge bracket on, this disconnects the top of the door from the cabinet. Then I lifted the door off the lower cam, removed the screws that held the cam in place on the door and the lower bracket on the cabinet and replaced the cams. I smeared some Vaselene on the cams and placed the door back on the lower cam, reconnected the upper hinge and replaced the hinge cover. All done and it works great!

very simple turned filter 1/4 counterclock wise removed insert new filter turned 1/4 turn clock wise finished

Removed the old filter (it screws out) an put the new one in!

It was really easy to do. The water filter is in the front of the refrigerator. Less than 30 seconds. I am very happy with PartSelect. I bought parts for my dryer too. New lint filter, timer knob and door handle. Parts arrive immediately. I am sure I will be back to PartSelect.com.

REMOVED GRILLE CAP,TWISTED OUT THE OLD CARTIDGE. FLUSHED THE WATER SYSTEM AND TWISTED IN THE NEW,

REmoved the broken one, put the new one on, just needed my reading glasses to figure out if I had the straight side matched up so it would work. Couldn't have been easier.

Removed broken bin by hand.
Replaced new bin by hand.
Removed old filter by hand.
Raplaced new filter by hand.
The End

My repair tool less than a minute, but I just wanted to say how fast my parts got here. I only requested standard mail but the parts were here the next day. Thanks for your prompt service!

Turned the lock knob on the filter and removed. put
lock knob on new filter and installed.

Very user friendly website, would highly recommend to anyone.

I had to disassemble the unit. After it was out I unpluged the wires and removed the broken ends of the stripper. Most of my time was spent figuring out how everything worked. I installed the new arm and slipped the unit back in place. It works perfectly. I could do it in under 30 minutes now. The cost savings is well worth the effort.

I pulled off the filter tab, unscrewed the filter and installed the new one. It was that easy!

Turned the old filter to get it out, and insert the new filter. Make sure the O ring isn't dislodged.