992028-1-S-Whirlpool-2304354           -Icemaker Shut Off Arm
992028-1-S-Whirlpool-2304354           -Icemaker Shut Off Arm 992028-2-S-Whirlpool-2304354           -Icemaker Shut Off Arm http://www.partselect.com/Schematics/Maytag/50671.gif

Icemaker Shut Off Arm

PartSelect Number PS992028

When the icemaker shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker not making ice.
  • Ice maker dispenses too much ice.
  • Compare At

    $35.82
  • You Save

    $5.97
  • Your Price

    $29.85
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 8 reviews What's this?
1-5 of 8
 

36 of 54 people found this instruction helpful

Parts Used:
  • Icemaker Shut Off Arm
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Thomas from Va. Beach, VA

Shut off arm broke

open ice maker door, use mirror to view slot in front of ice maker, slip piece in place and done

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used:
  • Icemaker Shut Off Arm
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Gregory from Milford, OH

Ice maker was over producing

Technician at ASK suggested replacing ice maker. Ordered new ice maker(prompt delevery)then noticed it came without wire arm and white platic "flag". Ordered arm and "flag", replaced all old with new and seems to be doing well. Perhaps all I needed was the plastic "flag" on the limit arm wire. Will never know. The new icemaker wiring had short wires and a connector. Old ice maker had no connector so the short wires were removed and the old wires plugged into the ice maker. Mirror was required in order to see the side wall mounting screws. Very narrow work area, tiny freezer side.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Casper, WY

I was just missing two parts to the icemaker

I slid in the arm and slid in the ice bucket with augar.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Lonnie from Corinth, TX

Ice maker leaking , drum broken

took out old ice maker (3) screws unpluged power plugged new one in replaced screws , installed new icemaker shut off arm and done
Ice bin auger disassembled bin to get at auger drum replaced broken auger reassembled bin and done 30 min tops hardest part was figuring out how to get bin apart

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: TED from WEST BRANCH, IA

Ice marker would not stop going though its cycle and fill with water

Got on line with Partselect and follow their directions. It was very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 8