| |
6 of 8 people found this instruction helpful
Parts Used
-
- Ice Cutter Grid Complete Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerBrad from Bakersfield CA
Grid assembly had a broken wire and would not separate the ice sheets into cubes
I removed the 2 screws on each side of the grid and disconnected the electrical plugs attached to the grid. I slid the broken unit out. I then carefully slid the new unit in making sure not to pinch any of the electrical wires. I replaced the mounting screws, plugged the 3 connectors back into place and turned the ice maker back on. I had ice cubes within a couple of hours
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers, Wrench set
CustomerLawrence from Houston TX
Replaced defective parts
had to have a strong box on the floor to support the double oven when removed. lot's of screws and wires to contend with.
|
0 of 4 people found this instruction helpful
Parts Used
-
- Ice Cutter Grid Complete Assembly
Level of DifficultyDifficult
Time to do repair:More than 2 hours
ToolsNutdriver
CustomerThomas from Powell OH
Cutter on ice maker failed and needed to be replaced
I completely broke down the unit cleaning or replacing any part with rust. The replacement grid assembly (cutter) came from partselect within days of ordering. I was able reassemble the unit with the new grid assemble. Now have fresh ice. Thanks Partselect... you made this do-it-your-selfer very HAPPY! My wife cannot beleive I got the unit back together.
|