http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/QOSGEZCT.gif
See part 12 in the diagram

Electronic Oven Clock Control - Black

PartSelect Number PS985981

Manufacturer Part Number 6610456
Manufactured by Whirlpool

This electronic board is located within the control panel.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $387.00
  • You Save

    $64.50
  • Your Price

    $322.50
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

7 of 7 people found this instruction helpful

Parts Used

  • Electronic Oven Clock Control - Black

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLaura from Chipley FL

Lighting hit my house and blew the computer board out, the stove top work but oven would not, replacing this part fixed my oven!! $200, compared to replacing for $600. thanks!

took back of stove off ,total 6 screws, unpluged blown computer 3 plugs, pluged in new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

  • Electronic Oven Clock Control - Black

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customermarcelo from jacksonville FL

Control panel started beeping and locked-up.

I looked at the symbol codes located at the schematic diagram. Schematic diagram is located at the back of range. I followed step by step troubleshooting procedure on the diagram then ordered part. The control panel is easy to remove and install, just plug and play.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 10 people found this instruction helpful

Parts Used

  • Electronic Oven Clock Control - Black

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerSherry from Saint Cloud FL

Control panel on stove needed to be replaced

Opened the back of the stove, unplugged the wires from the damaged panel, inserted the wires in the new panel, replaced the panel and back of stove. The plug-ins were located differently than the old panel, and two wires were identical - hope I plugged them in the right slots.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3