983507-1-S-Whirlpool-9706650           -Speed Control Assembly - Buff Knob
983507-1-S-Whirlpool-9706650           -Speed Control Assembly - Buff Knob 983507-2-S-Whirlpool-9706650           -Speed Control Assembly - Buff Knob

Speed Control Assembly - Buff Knob

PartSelect Number PS983507

Used with Stand Mixers.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $59.63
  • You Save

    $9.94
  • Your Price

    $49.69
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

7 of 11 people found this instruction helpful

Parts Used

  • Speed Control Assembly - Buff Knob

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerMatt from North Charleston SC

Kitchen aid mixer 6qt model 6 lift bowl type

cant be any more easy honestly the hardest part is taking the wires off the old board, mine were on there very well so I used a pair of needle nose pliers to remove them CARFULLY ! other than that this repair is.. the silver "beauty ring" has a screw on the back of the mixer remove, then there are four screws around the top cover plate remove, then the 2 screws that hold down the speed control remove. STOP ! make sure to lable each wire BEFORE removing from the old speed control !! POOF then put on the new one and put your mixer back togather your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 9 people found this instruction helpful

Parts Used

  • Speed Control Assembly - Buff Knob

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSteve from Reno NV

Speed control switch not working on kitchenaid stand mixer

Unplugged unit. Took top housing off of mixer (half dozen small screws). Disconnected speed control circuit card from five wiring connections. Removed card from mixer chassis (two screws). When new part came (the next day) I reversed the procedure in about 5 minutes and had a working mixer! Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2