This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate shut-off. The bin thermostat may need to be replaced if bin is overfilled, underfilled, or not producing ice. Thermistor can be tested with an ohm meter. This part is made of plastic and metal, and is white in color. This is an authentic part sourced from the original manufacturer.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Susan S - February 11, 2022
Verified Purchase
not the replacement part for the item number I used
I used the original part number and your company stated this was the replacement part. It didn't even come close to fitting in any sense and you haven't responded to attempts to return the item. Won't use your company again
February 14, 2022
Thank you for your review. I’m sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
Stan B - December 21, 2018
Verified Purchase
Easy Repair, works great. Does the job I expected.
Part was new and works as expected. Easy to install.
★★★★★
★★★★★
James N - December 6, 2018
Verified Purchase
Easy fix ice maker part
Easy fix for the thermostat on my ice maker
★★★★★
★★★★★
Patrick L - November 26, 2018
Verified Purchase
It works!
Easy replacement!
★★★★★
★★★★★
Douglas O - October 10, 2018
Verified Purchase
Easy Ice Maker Repair
My ice maker was making too much ice which lead me to believe the thermostat was defective. Order the replacement part from PartSelect, installed it and saved a $300 service call!
★★★★★
★★★★★
Mark E - September 26, 2018
Verified Purchase
thermostat
quick delivery and very easy to install - took about 5 minutes and now the ice maker stops overmaking ice
★★★★★
★★★★★
Drell G - September 25, 2018
Verified Purchase
Replace. Return part
Wrong part. Returned for credit. Have ordered from Whirlpool. Not received yet
★★★★★
★★★★★
Ray J - July 11, 2018
Verified Purchase
Worked as expected.
The part was new and was packaged very nice.
★★★★★
★★★★★
Verle O - May 26, 2018
Verified Purchase
Easy repair
Delivered timely and perfectly
★★★★★
★★★★★
Trent D - March 6, 2018
Verified Purchase
Quick and easy repair
Part arrived on time. 10 minite repir and icemaker making ice as usual once again
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Excess ice
Double check the actual part number. While the item looks the same, my unit had a 3 prong plug while the replacement had only 2 and did not fit.
Michael from WATCHUNG, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker Thermostat not shutting off the making of ice
un screwed the hex screw holding the thermostat and installed the new thermostat and pluged the new part int its place. I undid the front shield so i could get to the plug.
M Edward from Timonium, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
went good
went good
Jeffrey from IMPERIAL, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker overfilling with ice and would not stop production when full.
Very easy to replace. Down load the Manual online for a completely operating manual. Thermistor can be tested with an Ohm Meter. Proper values are listed in operating manual.
Ray from Terry, MS
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
25 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker would not stop when bin was full
I replaced the bin ice sensor with the new one from partselect.
Julius from Spring, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
10 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
IceMaker was overflowing so the suspicion was the Ice level sensor was working
The most difficult part of this order was identifying the part. The manual and picture for this model icemaker called the part a Ice level Sensor. No such item could be identified at Parts Select or at Kitchen Aid. After looking at item after item on the parts diagram it was determined the new name was a bin Thermostat not to be confu
... Read moresed with the Thermistor, Ice control. Replacement was quick and easy and took 5-10 minutes. Working fine now.
Read less
Dennis from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
20 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
September 11, 2019
It seems as that the ice cutting grid is remaining on full time causing bin temp to melt ice excessively. Could this be caused by one of the thermister?
For model number 106.89482992
Hi Chris,
Thank you for your question. If the cutting grid is not turning off, then the part may be malfunctioning and you will need to replace it. There may also be an issue with the electronic control board and you will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
October 14, 2019
What is the difference between the two thermistors for my model.
For model number KUIS185JSS2
Hello Joe, thank you for your question. Thermistor part number PS11755741 for your model monitors the temperature in the ice maker bin, and the Ice Control Thermistor part number PS11739075 for your model senses the temperature inside the refrigerator. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
Robert
April 13, 2022
I would like to return the thermistor we decided to get rid of the whirlpool it was 17 years old
For model number GI15nfrts0
Hello Robert, thank you for writing. If you have an order with our company and need to speak about that, you will have to contact our customer service. They can set up any returns and credits as well as help to find the correct parts. Please have your model number and order number ready and an agent will be happy to help you.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
