977493-1-S-Frigidaire-316207529         -Electronic Clock Control Board
977493-1-S-Frigidaire-316207529         -Electronic Clock Control Board 977493-2-S-Frigidaire-316207529         -Electronic Clock Control Board

Electronic Clock Control Board

PartSelect Number PS977493

Overlay is NOT included.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Will Not Start.
  • Compare At

    $250.26
  • You Save

    $41.71
  • Your Price

    $208.55
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

36 of 41 people found this instruction helpful

Parts Used

  • Electronic Clock Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerJohn from Woodbridge VA

Oven wouldn't heat up

Unplug the appliance.
Pull the appliance out so you can reach the back.
Unscrew the upper portion of the back cover of the range.
Unscrew the clock (master control) panel from the back and disconnect all the wires, taking care to remember which one goes where. I connected the wire to the new control unit before I unhooked the next wire.
You also need to peal the plastic display off the front of the old control unit and stick it onto the new control unit.
line up the new control unit and replace all the screws.
put the back panel back on and replace the remaining screws.
Plug the applicance back in and return to its original location.

Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerDAVID from THOMPSON CT

I had to change out electronic clock mechanism

REPAIR WAS JUST AS YOUR SITE STATED IT WOULD BE. YOUR SITE SAVED ME AT LEAST ONE HUNDRED DOLLARS! I WILL RECCOMEND YOUR SITE STRONGLY TO ANYONE SEEKING APPLIANCE PARTS. NAVAGATING WAS MADE EASY ON THIS SITE. WILL ALWAYS RETURN FOR FUTURE NEEDS. THANKS, DAVE CT.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

  • Electronic Clock Control Board

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers

CustomerJames from Acworth GA

Oven was not heating up

Just cut the power to the rang and took the back off using a 1/4 nut driver then disconnected the wires then undone the screws holding the board in then put the new one back in plug the wires back where they belong ,put the back back on turn the power back on and that was it

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3