12 of 15 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
CustomerJeff from Madison WI
Oven would go out, the electronic clock/display would begin flashing
I removed the back panel, removed the 4 screws holding in the clock, unplugged the wiring harness plug. I then had to remove the display screen which was glued onto the main clock piece. To accomplish this without tearing it, I used a hairdryer to soften the adhesive just enough to peal it off. Luckily, enough glue remained that I could then stick it onto the new clock. I then plugged in the wiring harness and reinstalled the clock and rear panel.