| |
11 of 13 people found this instruction helpful
Parts Used
-
- Drawer Slide - Left or Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJohn from Vancouver WA
Rails for basket drawer were broken.
The repair was as easy as removing three phillip head screws for each slide rail and removing and replacing the broken slide rail. However, over the years, the walls of the freezer had bowed making the drawer a bit short to ride on the new rails -- causing the drawer to fall off the slide rails since the span between each rail was now wider than the basket. To remedy this problem. I used washers and placed them on the back side of each rail where the screws are located . This was the perfect solution compensating for the extra width resulting from the slightly bowed walls in the freezer. This solution allowed the basket to fit on each slide rail without falling off .
|
3 of 5 people found this instruction helpful
Parts Used
-
- Drawer Slide - Left or Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCarol from Lawrence KS
Piece broken off of drawer slide
I removed the screws and replace the broken slide with the new slide. Put the basket drawer back on the track and it now stays in place and can easily be used once again.
|
2 of 3 people found this instruction helpful
Parts Used
-
- Drawer Slide - Left or Right Side
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJames from Bowie MD
Brackets for the food basket were broken and the basket alwaws fell off the track.
Removed the basket. Removed the two broken brackets (6 screws). Installed the two new brackets. Put the basket on the track. Done.
|
2 of 3 people found this instruction helpful
Parts Used
-
- Drawer Slide - Left or Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customerwarren from Farmdale OH
Broken drawer slide
removed old broken part, 3 screws, then installed new part.....done
|