This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range and automatically cuts off the flow of gas at a certain pressure.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Cooktop, Range.
This part works with the following products:
KitchenAid, Jenn-Air.
Part# WP9759091 replaces these:
4453033, 4455157, 9759091, WP4455157
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
June 19, 2019
I would like to convert this range to lp. Can you recommend a conversion kit?
For model number KDRP407HSS13
Hi Mark, thank you for your question. I have linked that kit below for you. Good luck with your repair.
My ignitors work fine. It takes the gas 8 to 10 seconds to reach the burners when the knob is turned on to the ignitor position. Could it by only the pressure regulator? Can the pressure regulator be installed by a novice, but ok mechanic?
For model number kdrp407hss
Hi Tom,
Thank you for your inquiry. For information on how to adjust your pressure regulator you will need to consult your owner's manual. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
