Took the two baskets out and removed the spinners which simply clip on. The bottom center spinner screws on/off using a tab in the center. Then removed four screws holding the filter cover in place. Then removed the one screw holding on the chopper cover and removed cover. Old chopper came out easily. Then rinsed and washed everythin
... Read moreg down to clean out all of the disgusting stuff that was clogging the unit. Put the new chopper in place, put chopper cover on and everything else in place and it now cleans like it was brand new!
Had to take apart dishwasher and replace chopper assembly. The dishwasher had a lot of debris in in including pieces of broken plastic forks. Now works great
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ronald. Barnhill
January 2, 2018
Chopper cover wont go back on
For model number kuds30ixbla
Hi Ronald,
Thank you for your question. There is a video on our website that you can reference on how to install the chopper cover. The part being installed in the video is the chopper assembly, and it should give you a general idea on how to install the part. You will find the video under part number PS11722146. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
January 13, 2018
How do i remove the "protector cover"? I removed the one torx screw but it doesn't seem to lift off easily. Regards,bob
For model number kudk031tbl3
Hello Bob, Thank you for your inquiry. It's supposed to just pop off after removing the torx screw. You can try carefully prying it out with a flat blade screwdriver (it may be helpful to slide a plastic card between the cover and the screwdriver as not to damage the cover or housing). If it doesn't come out easily, try sliding a piece of dental floss and pulling it upwards. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Erik
November 26, 2018
Does this dishwasher protector replacement come with the torx screw #15? I lost the original.
Hello Erik, Thank you for the question. The screw is sold sepratley from the protector. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
