972658-1-S-Whirlpool-8205178           -Turntable Roller Guide
972658-1-S-Whirlpool-8205178           -Turntable Roller Guide 972658-2-S-Whirlpool-8205178           -Turntable Roller Guide

Turntable Roller Guide

PartSelect Number PS972658

This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Tray won’t turn.
  • Compare At

    $20.44
  • You Save

    $3.41
  • Your Price

    $17.03
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 11 reviews What's this?
1-11 of 11
 

13 of 14 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerMichael from Sewanee TN

Broken tray ring for rotation of dish.

Used needle nose to pull off piece of old ring. Layed in new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCesa Lynn from Montgomery TX

Turn table in the micro was broken due to the plastic 3 wheel mechanism that cracked. T

I could just set the new whirly gig in the bottom hole of the micro and it worked. The new part was delivered in 24 hours of my order and hence fixed in 24 hours. Thanks so much Part Select

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerYvette from Riverdale IL

My turntable wouldn't turn

I took the turntable roller guide, dropped it into the hole, put the plate back on the turntable roller guide; and voila!!! It worked!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJack from Scottsboro, AL

Old roller piece broken

Took out the old, put in the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoellyn from Olathe KS

Stem broken off the turntable base so the turntable wouldn't rotate

Removed the broken plastic base that the glass turntable sets on and put in the new plastic base. Took 5 seconds max! The part arrived in about 24 hours! Great service!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJuan from Los Angeles CA

Turntable roller shaft was broken.

Put in the new part, took less than a minute...

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCynthia from Wylie TX

Original rotater broke

Replaced the broken piece with the one purchased at Partselect.com. I was concerned that the part would not be correct since all we did was enter the model number of the microwave. PartSelect.com was really easy to use and sent the correct part. Thanks so much for making this process easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDebbie from Franklin Park IL

Turntable stop moving

Replaced turntable support with new unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKirk from Los Angeles CA

Turntable stopped turning

It seems that the heat of the microwave cracks the part over time. It is a very simple installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJulie from Madison MS

Plate in microwave would not turn

took out plastic piece under plate (that was broken) and placed new one in the hole. No tools req'd. Works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

  • Turntable Roller Guide

Level of DifficultyEasy

Time to do repair:More than 2 hours

Tools

CustomerElizabeth from Horseshoe Bay TX

Fridge not cooling, freezer ok.

Ice covered the top back of the freezer compartment. This did not allow the cold air to move up to the fridge. Complete defrosting (36hrs) fixed the problem. There was a lot of water, from ice inside, that was not visible. We realized the freezer drawer must have been left cracked open. Thanks so much.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-11 of 11