Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William B - June 2, 2022
Verified Purchase
Part received ASAP with DIY instructions too
Got the part quicker then expected. Appreciate you providing DIY instructions on replacing the part. Washing machine working good now.
★★★★★
★★★★★
Thomas S - June 30, 2021
Verified Purchase
Easy Repair and Great Installation Video
Our Amana washer no longer needs duct tape to keep the door closed! This was a easy repair and would have taken 15 minutes tops had one of the screws below the soap drawer not been rusted into immovability. Removing that one screw took 15 minutes and a variety of tools! The installation video was great: provided good detail in a logical, step-by-step process. Your website is bookmarked for future needs.
★★★★★
★★★★★
Millard M - June 12, 2021
Verified Purchase
Worked perfectly
Quick delivery. Exact fit for the washer. Works fine. No problems.
★★★★★
★★★★★
Alvin H - June 5, 2021
Verified Purchase
Works as needed
Installed part. Functioning as needed.
Liked the short installation video - great help, though it did not apply to my machine.
★★★★★
★★★★★
Donald H - April 22, 2021
Verified Purchase
Great Service
We had an older washing machine where the part was not readily available. Parts Select checked with a sister company who had the part. It came in a timely manner and although it looked slightly different, it fit and works well. Customer service was very helpful.
Don
★★★★★
★★★★★
Lacy M - April 3, 2021
Verified Purchase
My new GO-TO company!
I've ordered parts from various companies and this company is great. They got it right the first time! Perfect part, easy repair. Took about 5 minutes to replace. This is my new GO-TO!!!!
★★★★★
★★★★★
Willa B - November 13, 2020
Verified Purchase
Easy repair
The part was an upgrade from the original latch. The new part had a metal latch and my original was plastic. The video helped although my washer was a bit different but was replaced fairly easily.
★★★★★
★★★★★
Alexander B - October 25, 2020
Verified Purchase
Simple Repair, However, watch more then one video on this repair.
The repair was extremely simple and fast once I found a good video. The first video showed taking the machine apart , lots of screws and panels. However, the second video I found showed simply removing the rubber seal inside the door and accessing the old part with a couple of screws. The first video would have worked but was a big enough hassle that I looked for an alternative. Definitely a part you can replace yourself in about 10 minutes.
★★★★★
★★★★★
Brian M - October 10, 2020
Verified Purchase
Very Easy Repair! Watch the video! Great product
Very Easy Repair! Watch the video! Great product! This was a quick Repair. The videos are critical to the DIYer! Great way to save some money and make a challenging task easy.
Great Job Part Select!
★★★★★
★★★★★
Ronald C - December 29, 2019
Verified Purchase
Worked as expected.
Part came on time and was factory part so everything went smoothly.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Planstic door Latch broke.
Removed covers per instruction video provided by website
Both door latch parts broke, one on the door and the other on the washer.
When I looked at the website for latch repair they showed a video (can't remember which brand but not Amana) where you had to take off the top and front of the washer to get at the latch part on the washer. For the Amana I had, you simply had to pull out a portion of the rubber gasket held onto the washer by a wire/spring combination (you
... Read more can take the wire off) to get at the latch assembly. You could then undo the three screws holding the latch to the washer, pull it out and unplug the three wiring connections to remove the old latch. Then plug connections into the new latch, reinstall, tighten screws and fit gasket and wire/spring assembly back together. Much easier than going thru the top and front of the washer!
Read less
Joan from GRAND RAPIDS, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not start.
easy process: troubleshoot problem on website-- order part--get part--watch "how to replace"video on you tube-- get it done with only a screwdriver--go out for movie and dinner with $$ saved.
LEE from RIO RANCHO, NM
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would not close on washer, had repair man to fix it $580.00 cost me $115. for parts ... thank u verrrry much
Removed 2 screws from rear of top that hold top of washer in place, lifted top at the rear and slid it back then lifted it off. Removed the three wiring harnesses from old switch, removed the three screws holding switch in place, theses are accessed from the door opening. removed the two lower screws first and held the switch from the top
... Read more while removing the last screw. Placed new switch in place and started the top screw by hand followed by hand starting the remaining two screws, tightened screws with phillips screw driver, reconnected the three harnesses, reinstalled the top and secured with the two screws. Door locks and unlocks as it is supposed to.
Read less
William from Victorville, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door hook
I ordered the part, followed the instructions listed on appliance help and put it in... easy
Removed the washer tub gasket and then removed the door part that I order . It was real easy to replace it and the tub gasket . Took about 8 min to complete everything .
MICHAEL from DERIDDER, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would not latch , and lights on front just flashed
1)I removed the bottom front panel,reached up the right side of the machine and pulled the manual release on the bottom of the latching mechanism.2)I then removed the top to the machine in order to gain access to the latch. 3)I removed three electrical connectors then the three mounting screws using a #15 Torx driver. I then reversed the
... Read morereverse procedure to install the new latch. total time to do the job was less than half an hour. Machine works OK.
Read less
FRANCIS from leesburg, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part of door latch broke along with door handle.
We had never attempted anything like this. But on Youtube we located a video of the repair. The video convinced us that the repair would be both easy and fast. On Partselect the process of locating and ordering the appropriate parts was amazing easy. Approximately 10 minutes after the parts arrived the repairs were finished, and we're sti
... Read morell crowing over our achievement.
Ask our experts a question about this part and we'll get back to you as soon as possible!
22 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
September 19, 2017
Hello.... i have a Whirlpool front load washer... the machine lights up and you can change or make any selections on the panel but when i push start nothing happens other than the light on the selector knob flashes.... the door does latch closed but normally when i hit start i hear it lock... do you feel that it could be a bad door lock or main computer? thanks for your impute.
For model number GHW9100LW
Hi David,
Thank you for your inquiry. Where your washer is not starting the part that fixes the issue the majority of the time is the door lock latch. I hope this helps. Thank you and have a great day!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 17, 2018
Machine will not start, nor will it do anything when we try different settings, their is a red light lower left that says control locked.
For model number GHW9100LW2
Hello Bill, Thank you for your inquiry. "Control Locked" means that the child lock feature which prevents the machine from starting is turned on, try pressing and holding the End of Cycle signal button on the right side of the panel for 15 seconds. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
September 14, 2017
My washer was running through a cycle during a storm and the power went on and off a few times. The washer cut off and will not power back on. I checked the breaker and the outlet and both are working. The clothes were locked in so I watched a video how to release the door mechanism and got the clothes out. I called a local repair company and the tech came out and didn't do anything but plug it in and checked the breaker. He then said its either the do locking mechanism or the main control board and he would call me back with a price for both. Shouldn't there be a way to diagnose which it is so I don't have to pay for both and only hope one works?
For model number MAH6700AWW
Hi Dave,
Thank you for the question. If there is no lights coming on and it is not powering on at all then It would more then likely be the control board. Usually with the door lock the lights on the control board will still come on but you would get a error or the door would not open but it would still power on.
Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Christina
March 7, 2018
I have a Whirlpool duet washer machine replaced part number wpa182634 Whirlpool replacement latch for door . Still not working code f dl still coming on. What do i do??
For model number GHW9400PW0
Hello Christina, thank you for your question. The F/DL does indicate a door lock failure. The door lock assembly, control board and harness would be the parts that might cause this problem. Try pushing in on the door while it is trying to lock and see if there is any improvement. Make sure the connections are tight. Quite a few other customers had the same issue, and checked the connections to make sure they were tight and that fixed the issue. If the latch connections are nice and tight, the other issue could be the control board itself. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
February 19, 2019
I have a Kenmore front loading washer. There is a small, spring loaded button, which seems to act as a safety of some kind in conjunction with the door latch. It has broken off. The washer will not operate without it engaged. Is it an integral part of the door lock (part number 8181700?) do i need to replace the entire door lock to repair this small piece of plastic?
For model number 110.42922200
Hi Tim,
Thank you for your question. This spring is referred to as the door lock plunger spring. It holds tension against the plunger to push the plunger into the door latch. If the spring has broken you will need to replace it. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Holly
August 10, 2017
I have a Maytag front loading washer model number mfw9600sq0. I just replaced the door latch, but it didn't fix my issue. The water runs into the washer, however it never spins, it just sits there quietly until it's time to drain, which it does fine. It's like my whole spin cycle is missing. Occasionally i will also get a short quick buzz noise. Any other ideas on how to trouble shoot this? Thanks
For model number MFW9600SQ0
Hi Holly,
Thank you for the question. Sounds like the timer that sends the appliance into the cycles is defective. When the timer is defective it can skip one or more cycles or not advance at all. The timer for your model is built into the Electric Control Board.
Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Wesley
January 16, 2019
No power,wont run
For model number Nfw7200tw
Hi Wesley,
Thank you for your question. If the washer will not start, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the door lock latch, the door lever and the drain pump. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lowell
November 12, 2019
What is needed to fix a f 11 code? I am able to reset, but I would like to made needed repairs before the problem remains and I can't reset!
For model number GHW9150PW0
Hello Lowell, Thank you for the question. The tech sheet inside the washer says this is a communications error between two control boards, the CCU (central control unit/ User Interface) PartSelect Number PS988707 and MCU (motor control unit) PartSelect Number: PS10064572. Unfortunately the CCU has been discontinued. You can check the wiring between the two boards to ensure everything is secure and does not need to be replaced. If the wiring is good, one of the two boards would need to be replaced. Hope this helps!
Will this part help latch the door? I recently bought the door latch because it was broke but now the door won't latch to close to secure it.
For model number NFW7200TW10
Hi Shelley. This part (PS11745016) allows your washer to lock, and I have double checked our system and it will fit the model number you have provided (NFW7200TW10). Thanks for your question, and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Byanca
October 6, 2017
Code FL pops up which I know means failed to lock so will getting the latch help or is another part I need?
For model number MAH8700AWW
Hi Byanca, Thank you for the question. Yes we suggest replacing the Door Lock Latch to fix the FL error code. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
