14 of 18 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
CustomerEdward from Billerica MA
Ice/water selection not working
Very simple repair on the freezer door the Water/Ice selector board was determined bad. Removed the outer frame from the section just pulls off this gives you access to the selector board used a flat head screw driver to pop the board out, then removed 4 screws that the board fits into removed the 3 cables removal done.
Put the new selector board in place installed 3 cables put board in frame installed 4 screws put door trim cover back on Job compete in under 10 minutes.
Very simple replacement.