963897-1-M-GE-WR12X10625-Handle-Front.jpg
963897-1-S-GE-WR12X10625-Handle-Front.jpg 963897-2-S-GE-WR12X10625-Handle-Front.jpg

Handle/Front

PartSelect Number PS963897

For freezer baskets.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $13.07
  • You Save

    $2.18
  • Your Price

    $10.89
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 7 reviews What's this?
1-7 of 7
 

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set

CustomerTodd from Huntersville NC

Broken drawer and freezer front/handle

With an allen wrench, I removed the remaining and broken drawer slide brack assembly on the bottom of the refridgerators right side. I then installed the new right-handed drawer slide bracket assembly in a similar fashion. The freezer handle easily snapped into place. The entire process was completed within ten (10) minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Handle/Front

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGeorge from Sugar Hill GA

Broken handle

Handle just snaps on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRobert from San Antonio TX

Our icemaker quit dispensing ice through the door. Then the water would only dispense intermittently.

First, I removed the four screws holding the auger motor and solenoid in place. After testing the solenoid as good I replaced it and did more research. I was having several symptoms so was unsure which part or parts were bad. I spent $50 on a service call and got the diagnosis of a bad main board. I ordered the part and got it two days later. After removing the several screws from the rear panel it was so easy to remove and replace the board. Plugged it back in and it worked perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Handle/Front

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerArthur from Sun Lakes AZ

Broken front/handle on roll out freezer drawer

Just snapped the part in place. No tools needed

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJeanne from Milledgeville GA

Items were broken

Really easy to install - they both snapped into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Handle/Front

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGina from Hamilton OH

Handle broke off of freezer bin

simply snap it on to the drawer. Very easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

Customerscott from chesterfield twp. MI

Ice dispencer wasn't working. Motor would shut down when it was used.

Removed the cover plate. Noted which wires went were. Removed the wire leads and placed them on the new board. Replaced the board into the socket and restored power.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-7 of 7