| |
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver, Pliers
CustomerWilliam from Cornelia GA
Timer would not advance.
Removed the four torx screws on top of backsplash, unplugged timer, removed the one holding screw, slid timer back and removed.
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRichard from Rockford IL
The timer would not advance
Unscrewed 4 screws to remove the front cover, disconnected the old timer and plugged the new one in. So easy.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerLeonard from Gray's Lake IL
Timer would not advance
removed cover & replaced timer im a parts changer just like the repair man
|