http://www.partselect.com/Schematics/GE/GE_Thumb/00112584i01.gif
See part 35 in the diagram

Washer Control Board

PartSelect Number PS960632

This part is located behind the control panel.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $215.86
  • You Save

    $35.98
  • Your Price

    $179.88
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

1 of 1 people found this instruction helpful

Parts Used

  • Washer Control Board

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerManuel from Los Molinos CA

Wash cycle selection button wore out and inadvertenly stopped on any cycle.

the repair was so easy it only took me 5 minutes to replace the control assy. 4 screws, take all the control knobs pull the face plate and that was it. and I thank partselect for the great customer service and fast shipping. thank you again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

  • Washer Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerMary from Putnam Valley NY

Washer wouldn't spin/drain...would also shut off in between cycles

First, I unplugged the washing machine, then I removed the front panel from the machine by unscrewing the screws on top of the washer (4 or 5 screws).. then used the socket set to remove the control assy (the part needing replacement),..this came apart quite easily..there were only several pieces to unscrew...then I disconnected the few wires,..3 or 4, which look similar to computer wires due to the fact that it is really obvious where they plug in to, so there is no chance to make a mistake on the connection. Once they were unplugged, I pulled out the old part, which came out easily, then pushed in the new part & reconnected the wires & closed everything up again.
It was very easy...the machine works great again...saved a lot of money doing it myself. I don't consider myself "mechanically inclined", so if I did this easily, I think anyone will be able to do it..I was afraid that once I took things apart, that I wouldn't remember how to put everything back together in the correct order, but there were so few parts that there was really no chance for confusion.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2