960329-1-S-GE-WE4M305           -Light Bulb - 120V 10W
960329-1-S-GE-WE4M305           -Light Bulb - 120V 10W http://www.partselect.com/Schematics/GE/GE_Thumb/00005070i03.gif

Light Bulb - 120V 10W

PartSelect Number PS960329

Sold individually. This light bulb has a screw in base.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $5.64
  • You Save

    $.94
  • Your Price

    $4.70
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 23 reviews What's this?
 

24 of 41 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerCraig from Castle Rock, CO

Dryer squeeked badly when running.

I've always heard it was a simple job to replace the belt and that would solve the problem. I'd defer to others online when they suggest to replace the rear bearing - they are totally right about that suggestion. My bearing basically fell apart in my hands. Not sure if I needed a belt or not, but it's worth replacing while you are tearing the thing apart. It took way longer to tear apart than to put back together. The parts and prices from PartsSelect were perfect. The parts were received in 4 business days as they said and were perfect replacement parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

23 of 47 people found this instruction helpful

Parts Used

Level of DifficultyDifficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerEdwin from Eagar, AZ

Blower wheel shaft hole was rounded out, lamp was out

Removed two screws on dryer top and removed top, removed two screws holding front of cabinet and removed cabinet front to the side, disconnected wires to door switch, removed two bolts from motor mount bracket, pulled motor back to access blower wheel, removed old wheel and installed new one, reversed steps, unscrewed old light bulb and screwed in new one.

Had pure hell getting to drum belt and putting it back onto motor pulley and idler, cussed a little, didn't really help . replaced front of cabinet and top, did test run all worked ok.

This job was a little difficult, espicially accessing the belt and idler pulley...

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used

  • Light Bulb - 120V 10W

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMary from Oak Point, TX

Blub burned out.

I first throwed the breaker then I took the old bulb out. Put new bulb in. Turned the breaker back on.
It worked great

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJames from Kennesaw, GA

Dryer drum loud sqeeking noise

Worn out top bearing plastic part and worn out felt. Removed top part of the front where the dial and buttons are, then the top, then the front where the parts I was replacing were. It was overall easy and didn't require a cdertified repair person. These were parts that were worn out. I am dissapointed in the GE product. It is only 3 1/2 yrs old and already worn out. Poor design and poor quality parts. I will look at other brands next time when replacing the front loading dryer and washer. Overall a faril;y easy repair that most mechnicaaly oreinted person can do. Also thaks to partselct for the diagrams which helped tremendously with meticulous parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Light Bulb - 120V 10W

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Plymouth, MA

Burned out interior dryer drum light

Tried to replace with home-store bought 6w light. Looked the same, fit into socket, but didn't work. Actually exploded when I turned it on! Be sure to use OEM part like this one. Worked perfectly!

Help other customers find the most helpful instructions.

Were these instructions helpful?