958966-3-M-GE-WD12X10163-Detergent-Dispenser-with-Rinse-Cap.jpg
958966-3-S-GE-WD12X10163-Detergent-Dispenser-with-Rinse-Cap.jpg 958966-1-S-GE-WD12X10163-Detergent-Dispenser-with-Rinse-Cap.jpg 958966-2-S-GE-WD12X10163-Detergent-Dispenser-with-Rinse-Cap.jpg

Detergent Dispenser with Rinse Cap

PartSelect Number PS958966

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not dispense detergent or Jet Dry.
  • Door latch failed.
  • Not cleaning properly.
  • Door won’t close.
  • Compare At

    $52.03
  • You Save

    $8.67
  • Your Price

    $43.36
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rinse Aid Cap

Part Number 958932

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

$4.01
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

27 of 30 people found this instruction helpful

Parts Used

  • Detergent Dispenser with Rinse Cap

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAlan from Marshall VA

White latch on soap dispenser broken- would not latch

1. Remove the outside panel on the door by removing 10 phillips screws on inside of door. Outside panel will drop loose - do not let it drop.
2. There are 3 electrical plugs that will have to be removed. The first is a 2" long quick connect in the upper middle of the door panel - it will pull straight out. Remember where it makes its connection. Now the exterior door panel will drop down to the floor, pivoting on two axle screws at the bottom. The interior panel can be left vertical for ease of access.
3. The other two electrical connections are on the left side of the old dispenser and can be removed with a simple pull to the left.
4. Remove the six (6) phillips screws from the panel that hold the dispenser in position. Two retainers will also drop off, which hold the dispenser top and bottom.
5. Angle the dispenser and work toward the inside of the dishwasher, turning as necessary to remove from the opening.
6. Reverse the process for installation. Remember to reconnect all three electrical connections.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Detergent Dispenser with Rinse Cap

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDavid from Stamford CT

White latch on soap dispenser broken- would not latch

The first posted instruction is dead on (except there are 14 phillips screws (not 10) on inside of door. Also, when reconnecting the 2" quick connect, make sure it is fully inserted - otherwise the numbers on the display panel will not show correctly. Mine didn't the first time, and I had to re-open the door panel and giggle around with the connection to get the numbers to display properly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 16 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerDeborah from Escondido CA

Dishes wre not getting clean

I handed the parts to my husband and asked him to do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3