Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS958908
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
All new seals
Help other customers find the most helpful instructions.
Were these instructions helpful?
The repair was much easier than I expected. Just remove the 7 screws holding the inside cover of the dishwasher. Pull off the old Door Gasket and fit the new one in. As to the baffles they just pull out and slide the new ones in. This part of the repair took 15-30 minutes. What took the longest was cleaning the various areas from the scum that built up over the years.
I examined the door gasket and found it to be worn. So I ordered the new parts and installed. The replacement went easily. There were other persons comments which said center handle on re-installing door inner which was very helpful. After replacing parts I did a test run and no leak...thinjking the problem was solved I went downstairs to double check and saw water dripping. I removed the botton facet of the dishwasher and checked underneath and found a small hose leaking. I ordered and replaced trying to do without removing the dishwasher ..well don't try to cut corners remove it as replacing without doing so is a pain and wasted time so I learned a lot from this experience. I found the comments of others fixes VERY helpful.
I removed the old gaskets, cleaned a little bit of scale away and installed the new gaskets. A piece of cake.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.