This part is the replacement side trim gasket for your dishwasher. It is black in color and is approximately 24 inches long and 1 inch wide. The gasket runs along the side of your dishwasher, between the dishwasher and the cabinet. It is used for aesthetic purposes, and also as a sound curtain. The main reason you would want to replace the door seal is if it is torn or missing. You will need a Phillips-head screwdriver to remove the dishwasher from the cabinet for this repair. This part is sold individually and is an OEM part from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD08X10055 replaces these:
AP3794317, 1088472, WD08X10040
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony
January 6, 2018
The gasket on the door bottom has deteriorated and the dishwasher is now leaking
For model number PDW9280J10SS
Hi Anthony, Thank you for the question. The bottom door gasket is only sold as part of the Inner Door Panel, PartSelect Number PS959500. In order to replace the bottom door gasket the panel will need to be ordered and replaced. Hope this helps!
Our GE dishwasher suddenly started leaking a couple weeks ago, creating a puddle the diameter of a soccer ball within 20 minutes of starting the cycle. We just replaced the gasket and that reduced the leaking to a few drops of water in the 1st 20 minutes of the cycle. We are wondering if we should also order and replace the door trim to eliminate all leaking. The current door trim is not one continuous piece of trim it has either cuts or tears near both ends that could be causing the leakage. We aren't sure if the trim is supposed to have those cuts near the ends. The diagram on your website doesn't show any cuts in the trim, that we see, so we're guessing the cuts in our trim are actually torn and causing leakage. Is the trim, once installed, supposed to be one continuous piece without any cuts/tears?
For model number PDW9800J00BB
Hi Leslie,
Thank you for your inquiry. You are correct, there are not supposed to be any cuts on the trim other than at the corner areas to help with bending around the machine. If you have more than that, then you will probably have to replace the part. You might also want to check the connects between your pump connector and your sump. These two parts can sometimes cause leaking in your specific appliance. You could also check the water inlet valve just in case as well. That part is located on the bottom left hand corner of your appliance. Good luck with your repair!
The door gasket deteriorated and is leaking. Do I need the entire Inner Door Panel or I can get just the gasket?
For model number pdw9980n00ss
Hello Peter, thank you for contacting us. We have researched and found that only replacing the gasket would help you out. The part number is PS958888. We hope this helps, good luck with this repair!
