Quick Question!

Have you ever purchased from PartSelect.com before?

958888-1-S-GE-WD08X10032        -Tub Gasket
958888-1-S-GE-WD08X10032        -Tub Gasket 958888-2-S-GE-WD08X10032        -Tub Gasket 958888-3-S-GE-WD08X10032        -Tub Gasket http://www.partselect.com/Schematics/GE/00125688i02.gif

Tub Gasket

PartSelect Number PS958888

This gasket lines the inside cabinet in the dishwasher.

This part works with the following brands: General Electric.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Leaking.

Compare At

$29.15

You Save

$4.86

Your Price

$24.29
Order within the next 20 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

43 of 52 people found this instruction helpful

Parts Used:
  • Tub Gasket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Thomas from Orlando, FL

Leaking door when appliance working

I gently removed the old gasket and replaced it with no problem. The part just pushes into a channel in the washer side.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Tub Gasket
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: DARYL from RENTON, WA

Had damage to the door seal from items sticking up in the silverware basked rollin past it.

No tools required. The seal just pushes into a channel around the tub. The lower ends are held by a wire that spans the lower edge of the door. I started with the lower end since I didn't know just how the seal was installed and found the wire that sticks into the hollow center of the end of the seal. The seal just pulls out so removed it and the wire. Cleaned the seal channel and wire and installed the new seal starting at the bottom and working upwards. after the lower ends are anchored,I found the center of the seal and upper channel and pushed it in place and worked around the corners and down. I did that because I have seen seals stretch as you push them in place and end up in the middle with excess material you have to work back into the seal channel.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Sharon from Northfield, MN

Difficulty rolling the lower rack in and out of dishwasher

Replaced all 8 of the wheels and axles (the old axles wouldn't hold the wheels in place any longer). Replaced the tub gasket because of cuts from knives. Both fixes were relatively easy to do, although directions for the tub gasket would have been nice!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 54 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Robert from Sacramento, CA

Front gasket leak, jets clogged, keypad shorted out

Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings.
I simply pulled the front gasket out

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4