Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS958888
This gasket lines the inside cabinet in the dishwasher.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
I gently removed the old gasket and replaced it with no problem. The part just pushes into a channel in the washer side.
Help other customers find the most helpful instructions.
Were these instructions helpful?
No tools required. The seal just pushes into a channel around the tub. The lower ends are held by a wire that spans the lower edge of the door. I started with the lower end since I didn't know just how the seal was installed and found the wire that sticks into the hollow center of the end of the seal. The seal just pulls out so removed it and the wire. Cleaned the seal channel and wire and installed the new seal starting at the bottom and working upwards. after the lower ends are anchored,I found the center of the seal and upper channel and pushed it in place and worked around the corners and down. I did that because I have seen seals stretch as you push them in place and end up in the middle with excess material you have to work back into the seal channel.
Replaced all 8 of the wheels and axles (the old axles wouldn't hold the wheels in place any longer). Replaced the tub gasket because of cuts from knives. Both fixes were relatively easy to do, although directions for the tub gasket would have been nice!
Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings. I simply pulled the front gasket out
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.