Ring Nut with Gasket WD01X10242

Henry from BENSENVILLE, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Water Leak

Replaced main conduit, o ring,and ring nut with gasket.

Other Parts Used:

ANDY from SHELBY, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench set

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the threads on the conduit broke and caused a leak

I pulled the dishwasher out and turned it on found the problem. I took the part off to find it broken. ordered the part on a sunday afternoon and it was there on Wednesday in time to fix it before I had to fly home.

Other Parts Used:

dianne from monacka, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dishwasher didn't clean well. Silverware basket was damaged.

Just removed the old ring nut by hand and replaced it with the new one. Took me one minute.
Exchanged the silverware basket.

Other Parts Used:

Basket Assembly Silverware

Andre from Ventura, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Water gushed from the main conduit. Dishwasher is not 2 years old.

First the parts took forever to get here and then the new main conduit nut was defective just as the original from the factory was. It would not thread correctly and had to be wet then forced by hand until the skin ripped off my fingertips.

GE stands for "Good Enough"

Other Parts Used:

TUB GASKET

John from Frederick, MD
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench (Adjustable)

0 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

top washer arm performing poorly

removed top rack which contains washer arm.
unscrewed the old ringnut which had lost its gasket, that the top rack washer arm merges with.
screwed the new ring nut onto the threads of the pipe which protrudes thru the back inside if the machine. reinstalled the top rack .
job done.

Duane from Springfield, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaking from top of main conduit

Note: I also purchased the main conduit part (PartSelect #: PS958967).

My repair is pretty much the same as the previous poster from TX. The RING NUT W/GASKET part seems to wear easily on this GE dishwasher.

Disconnected dishwasher from electrical. You have to remove the rear lower brace panel in order to remove the ... Read more

Read less

Other Parts Used:

Tom from Brooklyn, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Upper water conduit broke, flooding kitchen

Pulled dishwasher, disconnected electrical, removed rear lower brace panel to access lower clamp. Replaced conduit with new o-ring, nut, and lower clamp. Reinstalled brace panel, reconnected electrical, reinstalled dishwasher, and tested.

Other Parts Used: