958795-1-S-GE-WD01X10209        -Upper Spray Arm Bearing
958795-1-S-GE-WD01X10209        -Upper Spray Arm Bearing 958795-2-S-GE-WD01X10209        -Upper Spray Arm Bearing 958795-3-S-GE-WD01X10209        -Upper Spray Arm Bearing

Upper Spray Arm Bearing

PartSelect Number PS958795

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Unusual Noise.
  • Compare At

    $2.72
  • You Save

    $.45
  • Your Price

    $2.27
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRussell from Grand Prairie TX

Missing parts

I just purchased a house just before it went on foreclosure and several parts to th dishwasher was missing. I went on th internet and came upon your web site. Having no manual I thought that this was going to be abut as much fun as stepping on landmines. I was surprised that I entered the model number and was able o get all the parts hat I needed. The replacement was easy but a word to the wise sometimes on wheels they sell them with the locks that hold them to the basket and they will have the same part number. Other then that a fun experience.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 38 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerRobert from Sacramento CA

Front gasket leak, jets clogged, keypad shorted out

Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings.
I simply pulled the front gasket out

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 93 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerMark from Omaha NE

Control module went out - causing the heating element to super heat, melting several of the plastic interior parts

I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3