http://www.partselect.com/Schematics/GE/GE_Thumb/00122667i06.gif
See part 251 in the diagram

DUAL BAKE ELEMENT

PartSelect Number PS956149

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $121.74
  • You Save

    $20.29
  • Your Price

    $101.45
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
1-1 of 1
 

0 of 1 people found this instruction helpful

Parts Used

  • DUAL BAKE ELEMENT

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers

CustomerFrank from West Windsor NJ

Broken element in dual-bake element

** You must have a T-20 security torx bit to replace the element. I used Sears Model 25702 **

Slide out range

Unplug range

Remove two hex-head screws on power access panel, remove panel

Behind the main power connections, locate the four wires connecting to the lower bake element. They are horizontal, left to right , orange, yellow, two red. Note the order and pull wires straight back to disconnect the spade connectors

Slide range back

Remove top security torx screws and bottom hex head screws holding the element.

Pull element straight out

Transfer the gasket from the old element to the new one

Push new element straight back into place

Fasten the torx and hex head screws

Slide the range out

Reconnect the 4 wires

Close the power access panel, fasten the two hex screws

Plug range in

Slide range back

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1