Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Clock wouldn't keep time
Removed the top back cover. Then removed screw for clock circuit board. swapped wires from old circuit board to new circuit board. reinstalled screws. Then replaced top back cover.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
April 11, 2023
how to install overlay mfg# WB27K10170?
For model number RB758D
Hi Paul, thank you for contacting us. We would recommend following these general instructions to replace the overlay, part number PS953692: Disassemble the back cover of the top panel by removing the screws. Then, remove the quarter-inch screws on each edge of the control board and take the board off. Remove the wiring connections using a nose plier. Using a heat gun, heat the overlay by keeping it at some distance and constantly moving the gun above the overlay. Then, use a putty knife to carefully peel the overlay off. Install the new overlay by simply placing it on the control board and pressing it with your hand. Make the wiring connections and reinstall the control board. Put the outer panel cover back on by tightening the screws. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
