Quick Question!

Have you ever purchased from PartSelect.com before?

953592-1-S-GE-WB26X10136        -Turntable Motor
953592-1-S-GE-WB26X10136        -Turntable Motor 953592-2-S-GE-WB26X10136        -Turntable Motor http://www.partselect.com/Schematics/GE/00125324i01.gif

Turntable Motor

PartSelect Number PS953592

This motor rotates the glass turntable in the microwave.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$68.41

You Save

$11.40

Your Price

$57.01
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

7 of 8 people found this instruction helpful

Parts Used:
  • Turntable Motor
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Patricia from Old Bridge, NJ

Turntable wouldn't turn

What an informative website! Being a woman (ha, ha!!), I would never have attempted a microwave repair on my own if I hadn't read about all of the other successful, easy repairs. First, I shut the circuit breaker to my microwave. Then I removed the 5 screws holding in the bottom panel, unplugged the motor and removed the one screw holding the motor in place. I attached the new motor, plugged it back in and put all screws back. The hardest part of my whole repair was removing the bottom panel because it was so tightly wedged between my recently refaced cabinets. Other than that, the repair was a "piece of cake". The part came a few days after I ordered, which was also a big plus.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dennis L from Albuquerque, NM

Turntable stopped working

removed the bottom plate 7 screws, unplugged the wire connector from the motor , on the inside of the micro i removed the plastic piece that rotates the glass table, i then removed 1 screw holding the motor and reinstalled the new one!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2