14 of 21 people found this instruction helpful
Level of DifficultyReally Easy
Time to do repair:Less than 15 mins
CustomerRichard from Chardon, OH
Downdraft wouldn't work at all..... broken sensor
I pulled up the wires that the membrane switch hooks to and connected the new one with the new sensor pushed them down the opening. Took the sticky paper off the up and down button and stuck it too the indentation where it goes and there you have it as good as new! Works great!
9 of 22 people found this instruction helpful
Level of DifficultyVery Difficult
Time to do repair:More than 2 hours
ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
CustomerLouis from Lorton, VA
Raise and lower switch stopped working on downdraft power vent
In the process of diagnosing the problem, the circuit board burned out and the fan switch broke. Had a great deal of difficulty removing the unit. Had to disconnect gas line to range top and remove it first before I could remove the downdraft unit. I still had to get some crazy glue to hold down new microswitch on top of the unit. It is finally working fine now.