Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS953094
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
I first removed the top of the cooktop, which was 12 screws with a special star shape to them. Then had to pull the igniters out with some pliers (they have a really tight fit). Then remove the harness. Then I replaced the harness. After assembling, I replaced one of the ceramic igniters due to it being covered in baked on grease. Worked perfectly after that. I thank PartSelect for having super fast delivery. I ordered my parts on a Monday, they were at my doorstep the very next day, I was like WOW. And I chose regular shipping. Thank you very much for your service and your salespeople were VERY helpful, even after 3 order changes.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed the burers using a torx wrench disconnected the spark wire then replaced the spark generator and the wire harness to the gas valves. Installation went smooth and easy. replaced the spark wire and re-assembled the burnners. very easy repair. replaced the sark generator though it didn't need it because I didn't want to un-assessemble the unit again at a later date.
Do not remove the gas line.Take off the burner racks and burner coversGently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic.Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a little.To take off the top - use Star screw drivers to remove the burnersRemove all the burners.The star screws, and the burners are the only thing holding the top on. Take off the steel top.That exposes the ignitor switch assembly.Make sure you follow the positioning diagram that comes with the new part. Thats it really.I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful.Hope it helps.You'll have to
In order to replace the spark igniter switch and harness, order the appropriate model replacement part for your GE gas model. Turn of the circuit breaker if it is not already in the locked off position. Remove grates, gas covers, knobs and all from the cooktop surface. Unscrew all the screws with a clover tipped screw driver. Pull up and out on the 4 porcelain flints at each burner. Lift top up. You will see the part that needs to be replaced to your far right. Unplug it and remove it. Replace and connect the replacement. Reverse the process on opening the stovetop until everything is back in place as before. Flip your circuit breaker back on. Done.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.