952961-2-S-GE-WB15X10132        -Handle
952961-2-S-GE-WB15X10132        -Handle 952961-1-S-GE-WB15X10132        -Handle

Handle

PartSelect Number PS952961

Handle only. Screws not included.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $56.64
  • You Save

    $9.44
  • Your Price

    $47.20
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

15 of 16 people found this instruction helpful

Parts Used

  • Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTheodore from Gardiner NY

Door handle broke off when opening microwave

I opened the door and used the putty knife to release the plastic locks on the choke cover pulling it away from the inside of the door. Moved the choke cover away from the door enough to get a phillips screwdriver on the two screws that hold the handle top the door. Unscrewed the handle noting which way the handle is positioned to the door (there is a top and bottom to the handle), fastened the new handle to the door and snaped the choke cover back in place. Easy fix!

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 7 people found this instruction helpful

Parts Used

  • Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRoy from Glendale AZ

Broken handle

I removed the choke ring { inside gasket } from the door with a putty knife, exposing the two screws holding the handle to the door, removed the screws and replaced the handle. The choke ring pops back in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPhilip from Green Valley AZ

Door handle fractured mounting point.

Followed instructions described by others at this site. Pried up retaining fascia on the door to find access to two philips-head screws. Removed old broken handle and replaced with new. Snapped fascia back in place and that was it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3