Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS952864
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Removed the burers using a torx wrench disconnected the spark wire then replaced the spark generator and the wire harness to the gas valves. Installation went smooth and easy. replaced the spark wire and re-assembled the burnners. very easy repair. replaced the sark generator though it didn't need it because I didn't want to un-assessemble the unit again at a later date.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Repair to range went real well, Lifted range from counter. Removed eight screws that secure burnerassembly. Lifted burners from it's position, andremoved igniters. Installed heat srink at burner connections so as to ensure high voltage wouldhave no leaks. Removed insulation, and installedspark module.. Reassembled unit, placed in counter cut out, put 110 volt cord into outlet.Tested all burners, everything worked great..The repair took about hour and 15 minutes.Have fun and be careful...... THE END
I unscrewed the burners which was three screws per burner then removed gas control knobs and pulled up range top and un hooked the old module and replaced it with the new one two screws hold it in place and connected it the same way the old one was and put range back together and now it works perfect and saved me over $250.00 and part only coated around $40 with shipping great parts seller and I highly recommend partselect.com very easy fix thanks
Replaced Spark Module and adjusted igniters
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.