Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS952418
This metallic vent hood filter collects grease particles in the air from cooking. Sold individually.
This part works with the following brands: GE, Hotpoint & Kenmore.
First I removed the old air/grease filter from the exhaust fan. It get washed monthly, so after several years of use, it was time to replace it. Once the old filter was removed, I opend the new filter package, slide the new filter into the filter slot from left to right. Once in all the way, I slide it back to the right to set it completely. Second I began work on the cracked grill. I removed the phillips head screw on the left side of the grill, then removed the phillips head screw on the right side of the grill. I pulled the old grill off straight out. I opened the new grill package. I started to install the new grill by insert the bottom part first, then insert the top tabs and guide second, make sure I pushed slightly on the grill so it seated top and bottom at the same time. I installed both phillips head screws, left and right side, and completed the job.
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.